Technical Specification of CL/QL
|
|
CL5 |
CL3 |
CL1 |
QL5 |
QL1 |
|
|
Mixing Capacity |
Input Mixing Channels |
72 mono + 8 stereo |
64 mono + 8 stereo |
48 mono + 8 stereo |
64 mono + 8 stereo |
32 mono+ 8 stereo |
|
Mix Buses |
24 |
16 |
||||
|
Matrix Buses |
8 (Input to Matrix supported) |
8 (Input to Matrix supported) |
||||
|
Stereo Bus |
1 |
1 |
||||
|
Mono |
1 |
1 |
||||
|
Cue |
1 |
1 |
||||
|
Local Connectors |
Analog Inputs |
8 |
32 |
16 |
||
|
Analog Outputs |
8 |
16 |
8 |
|||
|
MY Slots |
3 |
2 |
||||
|
Dante I/O |
Primary / Secondary |
Primary / Secondary |
||||
|
Digital Out |
1 (AES/EBU) |
1 (AES/EBU) |
||||
|
GPI |
5 in / 5 out (CL V1.11 or later) |
5 in / 5 out |
||||
|
Word Clock I/O |
Yes |
Yes |
||||
|
MIDI I/O |
In / Out |
In / Out |
||||
|
External Redundant PSU |
Optional PW800W |
No |
||||
|
Meter Bridge |
Output meter built-in |
Optional MBCL |
No |
|||
|
Ethernet |
Yes |
Yes |
||||
|
AC Inlet |
V-Lock Type |
V-Lock Type |
||||
|
Scene Memory |
Number of Scenes |
300 |
300 |
|||
|
Recall Safe |
Yes |
Yes |
||||
|
Focus Recall |
Yes |
Yes |
||||
|
Fade Time |
Yes (0s ~ 60s) |
Yes (0s ~ 60s) |
||||
|
Preview |
Yes (CL V1.51 or later) |
Yes |
||||
|
Selective Load / Save |
Yes (CL V1.7 or later) |
Yes |
||||
|
Tactile Control Keys |
Yes |
No (on-screen) |
||||
|
Input Channel Functions |
Gain Compensation |
Yes |
Yes |
|||
|
Digital Gain |
Yes (-96dB ~ +24dB) |
Yes (-96dB ~ +24dB) |
||||
|
ATT |
-96dB ~ 0dB |
-96dB ~ 0dB |
||||
|
HPF |
20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later) |
20Hz ~ 600Hz, -6 or -12dB/oct Selectable |
||||
|
PEQ |
4 Band Full PEQ |
4 Band Full PEQ |
||||
|
Dynamics 1 |
Gate / Ducking / Compressor / Expander |
Gate / Ducking / Compressor / Expander |
||||
|
Dynamics 2 |
Compressor / Compander-H / Compander-S / De-esser |
Compressor / Compander-H / Compander-S / De-esser |
||||
|
Input Delay |
Yes (0ms ~ 1000ms, frame delay support in CL V3.0 or later) |
Yes (0ms ~ 1000ms, frame delay support in QL V3.0 or later) |
||||
|
DCA Group |
16 (Output DCA and DCA Roll-Out support in CL V2.0 or later) |
16 (Output DCA support in QL V3.0 or later) |
||||
|
MUTE Group |
8 |
8 |
||||
|
Number of Inserts |
2 (CL V2.0 or later) |
2 |
||||
|
Direct Out |
Yes |
Yes |
||||
|
Output Channel Functions |
PEQ |
4 Band Full PEQ |
4 Band Full PEQ |
|||
|
Dynamics 1 |
Compressor / Expander / Compander-H / Compander-S |
Compressor / Expander / Compander-H / Compander-S |
||||
|
MUTE Group |
8 |
8 |
||||
|
Number of Inserts |
2 (CL V2.0 or later) |
2 |
||||
|
Premium Rack |
Number of Premium Racks |
8 |
8 |
|||
|
Mountable Device |
RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (CL V3.0 or later) |
RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (QL V3.0 or later) |
||||
|
Effect Rack |
Number of Effect Racks |
8 |
8 |
|||
|
Number of Effect Programs |
54 |
54 |
||||
|
Mountable Device |
Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (CL V3.0 or later) |
Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (QL V3.0 or later) |
||||
|
GEQ Rack |
Number of GEQ Racks |
16 |
8 |
|||
|
Mountable Device |
31BandGEQ / Flex15GEQ / Dugan Automixer (CL V3.0 or later) / 8Band PEQ (CL V3.0 or later) |
31BandGEQ / Flex15GEQ / Dugan Automixer / 8Band PEQ (CL V3.0 or later) |
||||
|
Dante |
Number of I/O Channels |
64 in / 64 out |
64 in / 64 out |
32 in / 32 out |
||
|
Dante Patch from Console |
Yes |
Yes |
||||
|
Recording |
USB Memory Recording |
Yes |
Yes |
|||
|
DVS Recording |
Yes (DVS and Nuendo Live bundled) |
Yes (DVS and Nuendo Live bundled) |
||||
|
Broadcast Functions |
5.1 Surround Panning |
Yes (CL V3.0 or later) |
Yes (QL V3.0 or later) |
|||
|
Surround Monitor |
Yes (CL V3.0 or later) |
Yes (QL V3.0 or later) |
||||
|
Mix Minus |
Yes (CL V2.0 or later) |
Yes (QL V3.0 or later) |
||||
|
L-Mono / R-Mono / LR-Mono |
Yes (CL V3.0 or later) |
Yes (QL V3.0 or later) |
||||
|
Other Functions |
Port to Port |
No |
Yes |
|||
|
RTA |
Yes (CL V3.0 or later) |
Yes (QL V3.0 or later) |
||||
|
Output Port Delay |
Yes (0ms ~ 1000ms, frame delay support in CL V3.0) |
Yes (0ms ~ 1000ms, frame delay support in QL V3.0) |
||||
|
Cascade |
Yes (via MY slots) |
Yes |
||||
|
User Level |
Yes |
Yes |
||||
|
Help File |
Yes (CL V1.51 or later) |
Yes |
||||
|
Oscillator |
Sine Wave 1ch / Sine Wave 2ch (CL V3.0 or later) / Pink Noise / Burst Noise |
Sine Wave 1ch / Sine Wave 2ch (QL V3.0 or later) / Pink Noise / Burst Noise |
||||
|
Channel Link |
Yes (Output Channel Link support in CL V3.0 or later) |
Yes (Output Channel Link support in QL V3.0 or later) |
||||
|
Channel Copy/Move |
Yes |
Yes |
||||
|
User Interface |
Display |
10 inch Touch Panel |
10 inch Touch Panel |
|||
|
Centralogic Section |
Yes |
No |
||||
|
Faders |
16 + 8 + 8 + 2 |
16 + 8 + 2 |
8 + 8+ 2 |
32 + 2 |
16 + 2 |
|
|
Selected Channel Encoders |
Gain, HPF, PEQ (controls for 4 bands), Dynamics 1/2(Threshold only), Pan, Mix/Matrix Sends |
Gain, HPF, PEQ (controls for a selected band), Dynamics 1/2(Threshold only), Pan |
||||
|
Channel Encoder |
Yes (for Gain, Send Level, or an assigned parameter) |
No |
||||
|
Channel Name / Color Display |
Yes |
Yes |
||||
|
Custom Fader Banks |
Yes (customized for each fader section) |
Yes (customized for all faders in a lump) |
||||
|
User Defined Keys |
16 (x 4 banks in CL V3.0 or later) |
12 (x 4 banks in QL V3.0 or later) |
||||
|
User Defined Knobs |
4 |
4 (on-screen) |
||||
|
Touch and Turn Knob |
Yes (using a User Defined Knob) |
Yes |
||||
|
Monitor Level Knob |
Yes |
Yes (on-screen) |
||||
|
Wooden Arm Rest |
Yes |
No |
||||
|
iPad Stay |
Yes |
No |
Yes |
No |
||
|
Rack-mounting |
No |
No |
Yes |
|||
|
Software |
Editor |
CL Editor (Win/Mac) |
QL Editor (Win/Mac) |
|||
|
StageMix |
CL StageMix (iPad app) |
QL StageMix (iPad app) |
||||
|
Console File Converter |
Yes (Win/Mac) |
Yes (Win/Mac) |
||||
|
Input Terminals |
GAIN |
Actual Load |
For use with nominal |
Input level |
Connector |
||
|
Sensitivity*¹ |
Nominal |
Max. before clip |
|||||
|
OMNI IN 1-8 |
+66dB |
7.5kΩ |
50-600Ω Mics & |
-82dBu (61.6μV) |
-62dBu (0.616mV) |
-42dBu (6.16mV) |
XLR3-31 type (Balanced)*² |
|
-6dB |
-10dBu (245mV) |
+10dBu (2.45V) |
+30dBu (24.5V) |
||||
|
TALKBACK |
+64dB |
10kΩ |
50-600Ω Mics & |
-70dBu (0.245mV) |
-60dBu (0.775mV) |
-40dBu (7.75mV) |
XLR3-31 type(Balanced)*² |
|
+20dB |
-26dBu (38.8mV) |
-16dBu (0.123V) |
+4dBu (1.23V) |
||||
*1. Sensitivity is the lowest level that will produce an output of +4dBu(1.23V) or the nominal output level when the unit is set to maximum gain.(all faders and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced..(1=GND, 2=HOT, 3=COLD)
*3. In these specifications, 0dBu = 0.775 Vrms.
*4. All input AD converters are 24bit linear, 128times oversampling.
*5. +48V DC ( phantom power ) is supplied to OMNI IN (1-8) and TALKBACK XLR type connectors via each individual software controlled switches.
Analog output characteristics
|
Output Terminals |
Actual Source |
For Use With |
GAIN SW*5 |
Output Level |
Connector |
|
|
Nominal |
Max. before clip |
|||||
|
OMNI OUT 1-8 |
75Ω |
600Ω Lines |
+24dB (default) |
+4dBu (1.23 V) |
+24dBu (12.3 V) |
XLR-3-32 type(Balanced)*1 |
|
+18dB |
-2dBu (616mV) |
+18dBu (6.16V) |
||||
|
PHONES |
15Ω |
8Ω Phones |
– |
75mW*6 |
150mW |
Stereo Phone Jack (TRS) (Unbalanced)*2 |
|
40Ω Phones |
– |
65mW*6 |
150mW |
|||
*1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )
*2. PHONES stereo phone jack is unbalanced.( Tip=LEFT, Ring=RIGHT, Sleeve=GND )
*3. In these specifications, 0dBu = 0.775 Vrms.
*4. All output DA converters are 24bit, 128times oversampling.
*5. There are switches inside the body to preset the maximum output level.
*6. The position of the level control is 10dB lowered from Max.
Digital Input & Output Characteristics
|
Terminal |
Format |
Data length |
Level |
Audio |
Connector |
|
Primary/Secondary |
Dante |
24bit or 32bit |
1000Base-T |
64ch Input/64ch Output @48kHz |
etherCON Cat5e |
Digital Output Characteristics
|
Terminal |
Format |
Data length |
Level |
Connector |
|
|
DIGITAL OUT |
AES/EBU |
AES/EBU Professional Use |
24bit |
RS422 |
XLR-3-32 type (Balanced)*1 |
*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
I/O Slot (1-3) Characteristics
Each I/O Slot accepts a Mini-YGDAI card. Only Slot1 has a serial interface.
Control I/O characteristics
|
Terminal |
Format |
Level |
Connector |
|
|
MIDI |
IN |
MIDI |
– |
DIN Connector 5P |
|
OUT |
MIDI |
– |
DIN Connector 5P |
|
|
WORD CLOCK |
IN |
– |
TTL/75Ω terminated |
BNC Connector |
|
OUT |
– |
TTL/75Ω |
BNC Connector |
|
|
GPI (5IN/5OUT) |
– |
– |
D-Sub Connector 15P (Female) *1 |
|
|
NETWORK |
IEEE802.3 |
10BASE-T/100Base-TX/ |
RJ-45 |
|
|
LAMP (CL5=3, CL3=2, CL1=1) |
– |
0V – 12V |
XLR-4-31 type *2 |
|
|
USB HOST |
USB 2.0 |
– |
USB A Connector (Female)- |
|
|
Meter Bridge (CL3/CL1 only) |
– |
– |
D-Sub Connector 9P (Female)- |
|
*1. Input pins: Internal TTL-level pull-up resistors provided (47kΩ). Output pins: Open-drain output (Vmax = 12V, max. sink current/pin = 75mA) Power pins: Output voltage Vp = 5V, max. output current Imax = 300mA
*2. Pin 4 = +12V, Pin 3 = GND, lamp rating 5W. Software voltage control.
Rio3224-D, Rio1608-D
|
General specifications |
Rio3224-D |
Rio1608-D |
|
|
Sampling frequency rate |
Internal |
44.1kHz, 48kHz, 88.2kHz, 96kHz |
44.1kHz, 48kHz, 88.2kHz, 96kHz |
|
External |
44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% |
44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% |
|
|
Signal delay |
Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz |
Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz |
|
|
Total harmonic distortion |
Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min. |
Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min. |
|
|
Frequency response |
+0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz |
+0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz |
|
|
Dynamic range |
108dB typ., INPUT to OUTPUT, Input Gain = Min |
108dB typ., INPUT to OUTPUT, Input Gain = Min |
|
|
Crosstalk |
-100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min. |
-100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min. |
|
|
Power requirements |
US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz |
US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz |
|
|
Power consumption |
120W |
70W |
|
|
Dimensions |
W |
480mm (18 7/8in) |
480mm (18 7/8in) |
|
H |
232mm (9 1/4in) |
144mm (5 3/4in) |
|
|
D |
361.5mm (14 1/4in) |
361.5mm (14 1/4in) |
|
|
Net weight |
12.4kg (27.3lb) |
8.8kg (19.4lb) |
|
|
Others |
Temperature Range: Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃ |
Temperature Range: Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃ |
|
Analog input characteristics
|
Input Terminals |
GAIN |
Actual Load |
For Use With |
Input Level |
Connector |
|
|
Nominal |
Max. before clip |
|||||
|
INPUT 1-32 (Rio3224-D) |
+66dB |
7.5kΩ |
50-600Ω Mics & |
-62dBu (0.616mV) |
-42dBu (6.16mV) |
XLR-3-31 type (Balanced)*1 |
|
-6dB |
+10dBu (2.45V) |
+30dBu (24.5V) |
||||
*1. XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)
*2. In these specifications, 0dBu = 0.775 Vrms.
*3. All input AD converters are 24bit linear, 128times oversampling.
*4. +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch.
Analog output characteristics
|
Output Terminals |
Actual Source |
For Use With |
Max.Output Level |
Output Level |
Connector |
|
|
Nominal |
Max. before clip |
|||||
|
OUTPUT 1-8 |
75Ω |
600Ω Lines |
+24dB (default) |
+4dBu (1.23 V) |
+24dBu (12.3V) |
XLR-3-32 type (Balanced)*1 |
|
+18dB |
-2dBu (616mV) |
+18dBu (6.16V) |
||||
|
OUTPUT 9-16*5 |
75Ω |
600Ω Lines |
+24dB (default) |
+4dBu (1.23 V) |
+24dBu (12.3V) |
XLR-3-32 type (Balanced)*1 |
|
+18dB |
-2dBu (616mV) |
+18dBu (6.16V) |
||||
*1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )
*2. In these specifications, 0dBu = 0.775 Vrms.
*3. All output DA converters are 24bit, 128times oversampling.
*4. There are switches inside the body to preset the maximum output level. *5. Rio3224-D only
Digital Input & Output Characteristics
|
Terminal |
Format |
Data length |
Level |
Audio |
Connector |
|
Primary/Secondary |
Dante |
24bit or 32bit |
1000Base-T |
24ch Input/32ch Output (Rio3224-D) 8ch Input/16ch Output (Rio1608-D) 8ch Output (Ri8-D) 8ch Input (Ro8-D) |
etherCON Cat5e (Rio3224-D, Rio1608-D) RJ-45 (Ri8-D, Ro8-D) |
Digital Output Characteristics
|
Terminal |
Format |
Data length |
Level |
Connector |
|
|
AES/EBU OUT 1-4*1 |
AES/EBU |
AES/EBU Professional Use |
24bit |
RS422 |
XLR-3-32 type (Balanced)*2 |
*1 Rio3224-D only
*2. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )
Omtaler
Det er ingen omtaler ennå.