Endelig har Yamaha laget en digitalmikser til en suverent pris med mange av de samme funksjonene og brukergrensesnittet fra sine andre prisbelønnede digitalmiksere. I første omgang kommer det 3 modeller TF1, TF 3 og TF 5 med henhodsvis 16, 24 og 32 mik.preamper. Ta gjerne kontakt om du ønsker utfyllende informasjon eller demo.
Ample input capacity and hands-on control in a compact console that can handle a wide range of applications.
- 25 motor faders (24 channels + 1 master)
- 48 input mixing channels (40 mono + 2 stereo + 2 return)
- 20 Aux (8 mono + 6 stereo) + Stereo + Sub buses
- 8 DCA groups with Roll-out
- 24 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs
- 16 analog XLR outputs
- 34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device
- 1 expansion slot for NY64-D audio interface card
TF5, TF3, TF1
|
Outline |
TF5 |
TF3 |
TF1 |
|
|
Fader Configuration |
32 + 1 (Master) |
24 + 1 (Master) |
16 + 1 (Master) |
|
|
Mixing Capacity |
Input Channels |
48 (40 mono + 2 stereo + 2 return) |
48 (40 mono + 2 stereo + 2 return) |
40 (32 mono + 2 stereo + 2 return) |
|
Aux Buses |
20 (8 mono + 6 stereo) |
20 (8 mono + 6 stereo) |
20 (8 mono + 6 stereo) |
|
|
Stereo Buses |
1 |
1 |
1 |
|
|
Sub Buses |
1 |
1 |
1 |
|
|
Input channel functions |
8 DCA Groups |
8 DCA Groups |
8 DCA Groups |
|
|
I/O |
Inputs |
32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
|
Outputs |
16 (XLR) |
16 (XLR) |
16 (XLR) |
|
|
Expansion slots |
1 |
1 |
1 |
|
|
On-board processors |
DSP |
8 Effects + 10 GEQ |
8 Effects + 10 GEQ |
8 Effects + 10 GEQ |
|
USB |
34×34 USB Audio Interface, 2-track recording via USB Storage Device |
34×34 USB Audio Interface, 2-track recording via USB Storage Device |
34×34 USB Audio Interface, 2-track recording via USB Storage Device |
|
|
General specifications |
TF5 |
TF3 |
TF1 |
|
|
Sampling frequency rate |
Internal |
48 kHz |
48 kHz |
48 kHz |
|
Signal delay |
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
|
|
Fader |
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
|
|
Total harmonic distortion |
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
|
|
Frequency response |
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
|
|
Dynamic range |
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
|
|
Hum & noise level |
Equivalent input noise |
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
|
Residual output noise |
–85 dBu, ST master off (Measured with an A-Weight filter) |
–85 dBu, ST master off (Measured with an A-Weight filter) |
–85 dBu, ST master off (Measured with an A-Weight filter) |
|
|
Crosstalk |
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
|
|
Power requirements |
100–240 V 50/60 Hz |
100–240 V 50/60 Hz |
100–240 V 50/60 Hz |
|
|
Power consumption |
120 W |
110 W |
100 W |
|
|
Dimensions |
W |
866 mm (34.1in) |
716 mm (28.2in) |
510 mm (20.1in) |
|
H |
225 mm (8.9in) |
225 mm (8.9in) |
225 mm (8.9in) |
|
|
D |
599 mm (23.6in) |
599 mm (23.6in) |
599 mm (23.6in) |
|
|
Net weight |
20.0 kg (44.1lb) |
17.0 kg (37.5lb) |
13.5 kg (29.8lb) |
|
|
Accessories |
Quick Guide, Power Cord, CUBASE AI download information |
Quick Guide, Power Cord, CUBASE AI download information |
Quick Guide, Power Cord, CUBASE AI download information |
|
|
Options |
Expansion Card, Foot Switch (FC5) |
Expansion Card, Foot Switch (FC5) |
Rack-mount Kit RK5014, Expansion Card, Foot Switch (FC5) |
|
|
Others |
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
|
Analog input characteristics
|
Input Terminals |
GAIN |
Load |
For Use With |
Input Level |
Connector |
balanced / |
||
|
Sensitivity*1 |
Nominal |
Max. before clip |
||||||
|
INPUT1-32 (TF5) |
+66dB |
7.5K Ω |
50-600 Mics |
-82dBu (61.6V) |
-62dBu (0.616mV) |
-42dBu (6.16mV) |
Combo Jack (XLR-3-31 type *2 |
Balanced |
|
-6dB |
-10dBu (245mV) |
+10dBu (2.45V) |
+30dBu (24.5V) |
|||||
|
ST IN 1,2 |
— |
10k |
600 Lines |
-30dBV (31.6V) |
-10dBV (316mV) |
+10dBV (3.16V) |
RCA Pin Jack |
Unbalanced |
Omtaler
Det er ingen omtaler ennå.