-
×
Beta Three R4/R8 compact linearray
1 × kr 31 245,-
Delsum: kr 31 245,- (inkl. mva)
Vis handlekurv «PEAVEY PVs-18 Active Subwoofer – 18″» er lagt til handlekurven din.
Neumann KH 750 DSP D G Subwoofer
kr 20 650,- (ink. mva)
Compact DSP-controlled closed cabinet subwoofer
Bestillingsvare
Ikke på lager, kontakt oss for bestilling og leveringstid.
FRAKTPRISER FRA 99,-
(Gjelder ikke varer over 35 kg)
Varenummer: 508296-SEN
Kategori: Subwoofer
- Beskrivelse
- -Deep bass in a small space
- -The perfect complement to KH 80 DSP, KH 120, KH 150 and KH 310
- -Optional tools to align and operate a complete Neumann stereo system
- Automatic Monitor Alignment – Automatic room correction of stereo systems using the Neumann MA 1 measurement microphone (software for Mac/PC)
- Neumann.Control – Free iPad®-App for setup, operation, and room correction of stereo systems via guided and/or manual alignment
- -Increasing the bass extension of the monitoring system
- -Increasing the maximum SPL of loudspeakers
- -Decreasing harmonic and intermodulation distortion of loudspeakers
- -Reproducing the LFE channel
- -Reproducing the “Sub” signal of a bass managed multichannel source
- -Working as an extension for KH line subwoofer systems
- Spesifikasjoner
- Tilleggsinformasjon
Active DSP Subwoofer, 10″ driver, 48.4 liters, 256 W, 105 dB SPL, 18 – 750 Hz, anthracite metallic, 100-240 VAC, 3 Mains cables (EU, UK, US)
DSP POWER FOR ALL
The compact KH 750 DSP is the ideal choice for smaller rooms and smaller studio monitors. It has a unique and flexible Bass Manager (2.0/0.1), analog and digital inputs, four routing modes and adaptable acoustical controls to be used in many different configurations.
In addition to its outstanding acoustic properties this DSP-based subwoofer offers functions for the Neumann monitors connected to its outputs regarding the interplay with the following tools:
This also applies to all non DSP-based Neumann monitors connected (analog) to the KH 750 DSP, which enables them to make use of the subwoofer’s DSP power.,
MORE ABOUT THE KH 750 DSP
The newly designed 10” long-throw driver has a strong linear working magnet system with ELFF™ technology (Extremely Linear Force Factor™). As subwoofers are usually placed on the floor, a robust grille protects the driver from accidental damage. The ultra-compact cabinet is a closed design which brings the fastest possible transient response.
The two analog XLR inputs are balanced as are the two analog XLR outputs. The 192 kHz / 24-bit digital input can accept AES3 and S/P-DIF signals. There is a bypassable standby function and the switch-off time can be adjusted in the Neumann.Control iPad® app.
The KH 750 DSP can be used in music, broadcast, and post production studios for tracking, mixing, and mastering.
APPLICATIONS:
| Mains Power Supply: input voltage; frequency | 100-240V; 50/60 Hz |
|---|---|
| Product dimensions (height x width x depth) | 383 x 330 x 383 mm (15 1/8" x 13" x 15 1/8") |
| Operating conditions | +10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing |
| Transport/storage conditions | -25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing |
| Packed cube | 0.100 m³ |
| Free field frequency response ±6 dB | 16 ... 800 Hz |
| Free field frequency response ±3 dB | 18 … 750 Hz |
| Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu) | <20 dB(A) SPL |
| Sine wave output with a THD < 0.5 % at 1 m in half space | 95 dB SPL (>70 Hz) |
| Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz) | 105.0 dB SPL |
| Analog input(s) | 2 x XLR: analog electronically balanced |
| Analog input impedance | >13k Ohms |
| Max. input level | < +24 dBu |
| Common mode rejection ratio (CMRR) | > 56 dB @ 15 kHz |
| Volume control | via Neumann.Control software |
| Volume control range; resolution | 0 … -∞ dB; 0.1 dB |
| Input gain control (sensitivity) | +2 ... -12 dB |
| Output level control (output level in 1 m based on 0 dBu input level) | 94; 100; 108; 114 dB SPL |
| Digital converter: resolution; design | 16 … 24-bit DAC; Δ∑ |
| Digital converter: sampling rate | 22.05; 24; 32; 44.1; 48; 64; 88.2; 96; 176.4; 192 kHz |
| Dynamic range A-D-A | >120 dB(A) |
| Dynamic range D-A | >123 dB(A) |
| Latency | 1.5 ms (A-D-A linear phase); 1.2 ms (D-A linear phase) |
| Delay: User adjustable delay range | 0 ... 100 ms and 2 x 0 ... 20.8 ms |
| Delay: Resolution: time; distance | 0.1 ms; 3.44 cm (1 3/8”) |
| Delay: Max. frames Audio-video synchronisation (lip sync) | 2.5 (40 ms) frames; 3 (33 ms) frames |
| Delay: Time-of-flight maximum distance | 2 x 7.16 m (23' 5") |
| Controller design | Digital; active |
| Crossover frequency | 80 Hz |
| Crossover slope | 24 dB/oct; 4th order |
| Equalization: via Neumann.Control software | 8 x full parametric IIR + low / high shelf global balance |
| FIR phase correction | For connected analog loudspeakers: Linear phase (170 Hz ... 16 kHz; +/- 45°) |
| Protection circuitry | Driver (thermo limiter); Electronics (temperature limiter); Amplifier (peak limiter, temperature limiter, temperature protection and overcurrent protection); Power supply (temperature limiter and overcurrent protection) |
| Infrasonic filter: frequency; slope | 17.5 Hz; 12 dB/oct. |
| Remote control | Neumann.Control software via an RJ45 connector carrying standard IP data |
| Display: On; Normal Operation | Green LED |
| Display: Identification | Amber LED |
| Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute | Red LED |
| Output power woofer amplifier (THD+N with limiter deactivated: 10%) | 256 W |
| Power consumption (230 V / 100 V): Standby | <300 mW |
| Power consumption (230 V / 100 V): Full output | 410 W |
| In-rush current (Peak) | 30 A @230 VAC |
| Standby | Disabled; 90 mins (default); user defined in software |
| Cabinet material | Wood cabinet, aluminum electronics panel |
| Cabinet surface finish; color (front / back) | Painted; metallic anthracite (RAL 7021) / black (RAL 9005) |
| Woofer | 265 mm (10") with protecting black metal grille |
| External net volume | 48.4 liters |
| Product weight | 19.5 kg (43 lbs) |
| Packed dimensions (height x width x depth), mm (inches) | 490 x 395 x 515 mm (19 1/4" x 16 1/2" x 20 1/4") |
| Packed weight | 22.0 kg (48 lbs 8 oz) |
| Power consumption (230 V / 100 V): Idle | 18 W |
| Vekt | 20 kg |
|---|---|
| Produsent | Neumann |
