Endelig har Yamaha laget en digitalmikser til en suverent pris med mange av de samme funksjonene og brukergrensesnittet fra sine andre prisbelønnede digitalmiksere. I første omgang kommer det 3 modeller TF1, TF 3 og TF 5 med henhodsvis 16, 24 og 32 mik.preamper. Ta gjerne kontakt om du ønsker utfyllende informasjon eller demo.
Compact, portable, and even rack mountable, the TF1 offers impressive capability and versatility for smaller systems.
- 17 motor faders (16 channels + 1 master)
- 40 input mixing channels (32 mono + 2 stereo + 2 return)
- 20 Aux buses (8 mono + 6 stereo) + Stereo + Sub
- 8 DCA groups with Roll-out
- 16 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs
- 16 analog XLR outputs
- 34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device
- 1 expansion slot for NY64-D audio interface card
TF5, TF3, TF1
|
Outline |
TF5 |
TF3 |
TF1 |
|
|
Fader Configuration |
32 + 1 (Master) |
24 + 1 (Master) |
16 + 1 (Master) |
|
|
Mixing Capacity |
Input Channels |
48 (40 mono + 2 stereo + 2 return) |
48 (40 mono + 2 stereo + 2 return) |
40 (32 mono + 2 stereo + 2 return) |
|
Aux Buses |
20 (8 mono + 6 stereo) |
20 (8 mono + 6 stereo) |
20 (8 mono + 6 stereo) |
|
|
Stereo Buses |
1 |
1 |
1 |
|
|
Sub Buses |
1 |
1 |
1 |
|
|
Input channel functions |
8 DCA Groups |
8 DCA Groups |
8 DCA Groups |
|
|
I/O |
Inputs |
32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
24 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
16 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin) |
|
Outputs |
16 (XLR) |
16 (XLR) |
16 (XLR) |
|
|
Expansion slots |
1 |
1 |
1 |
|
|
On-board processors |
DSP |
8 Effects + 10 GEQ |
8 Effects + 10 GEQ |
8 Effects + 10 GEQ |
|
USB |
34×34 USB Audio Interface, 2-track recording via USB Storage Device |
34×34 USB Audio Interface, 2-track recording via USB Storage Device |
34×34 USB Audio Interface, 2-track recording via USB Storage Device |
|
|
General specifications |
TF5 |
TF3 |
TF1 |
|
|
Sampling frequency rate |
Internal |
48 kHz |
48 kHz |
48 kHz |
|
Signal delay |
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz |
|
|
Fader |
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders |
|
|
Total harmonic distortion |
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz) |
|
|
Frequency response |
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT |
|
|
Dynamic range |
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min. |
|
|
Hum & noise level |
Equivalent input noise |
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter) |
|
Residual output noise |
–85 dBu, ST master off (Measured with an A-Weight filter) |
–85 dBu, ST master off (Measured with an A-Weight filter) |
–85 dBu, ST master off (Measured with an A-Weight filter) |
|
|
Crosstalk |
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min. |
|
|
Power requirements |
100–240 V 50/60 Hz |
100–240 V 50/60 Hz |
100–240 V 50/60 Hz |
|
|
Power consumption |
120 W |
110 W |
100 W |
|
|
Dimensions |
W |
866 mm (34.1in) |
716 mm (28.2in) |
510 mm (20.1in) |
|
H |
225 mm (8.9in) |
225 mm (8.9in) |
225 mm (8.9in) |
|
|
D |
599 mm (23.6in) |
599 mm (23.6in) |
599 mm (23.6in) |
|
|
Net weight |
20.0 kg (44.1lb) |
17.0 kg (37.5lb) |
13.5 kg (29.8lb) |
|
|
Accessories |
Quick Guide, Power Cord, CUBASE AI download information |
Quick Guide, Power Cord, CUBASE AI download information |
Quick Guide, Power Cord, CUBASE AI download information |
|
|
Options |
Expansion Card, Foot Switch (FC5) |
Expansion Card, Foot Switch (FC5) |
Rack-mount Kit RK5014, Expansion Card, Foot Switch (FC5) |
|
|
Others |
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C |
|
Analog input characteristics
|
Input Terminals |
GAIN |
Load |
For Use With |
Input Level |
Connector |
balanced / |
||
|
Sensitivity*1 |
Nominal |
Max. before clip |
||||||
|
INPUT1-32 (TF5) |
+66dB |
7.5K Ω |
50-600 Mics |
-82dBu (61.6V) |
-62dBu (0.616mV) |
-42dBu (6.16mV) |
Combo Jack (XLR-3-31 type *2 |
Balanced |
|
-6dB |
-10dBu (245mV) |
+10dBu (2.45V) |
+30dBu (24.5V) |
|||||
|
ST IN 1,2 |
— |
10k |
600 Lines |
-30dBV (31.6V) |
-10dBV (316mV) |
+10dBV (3.16V) |
RCA Pin Jack |
Unbalanced |
Omtaler
Det er ingen omtaler ennå.