Yamaha SWP1-8MMF

kr 19 018,- (ink. mva)



(Gjelder ikke varer over 35 kg)

Varenummer: SWP1-8MMF Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      The SWP1 series network switch equipped with eight etherCON ports, one opticalCON port, and one option slot.

      General specifications

      Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T, etherCON connector) 8
      Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T, RJ-45 connector)
      Number of SFP ports (1000BASE-SX, opticalCON connector) 2 (1 optical module is installed as standard)
      Console port 1 (RJ-45)
      Automatic negotiation Available
      Auto MDI/MDI-X Available
      Switching capacity 20 Gbit/s
      Throughput 15 Mpps
      Maximum number of MAC addresses 16,384
      Frame buffer 1024 kB
      VLAN Port VLAN, Tag VLAN (IEEE802.1Q), Private VLAN
      Maximum number of VLANs 256 (VLAN ID 1–4,094) *VLAN ID 1 is the default VLAN ID.
      IP multicast IGMP Snooping (v1/v2/v3)
      QoS 8 egress queues, Policy-based QoS, Remarking (CoS, ToS, DSCP), Scheduling (SP, WRR)
      Flow control IEEE802.3x (Full-duplex), back pressure (Half-duplex)
      Support functions Storm control, HOL blocking prevention, Loop detection, ACL, SNMP agents, Link aggregation (IEEE 802.3ad LACP, Static), Spanning tree (STP*, RSTP*, MSTP), Port mirroring, Port shutdown, Link speed down shift, Packet counter, Power saving mode (IEEE802.3az EEE; Disabled in DANTE mode), DHCP client, Logging, Firmware download via TFTP/HTTP, Config file download via TFTP *STP and RSTP are supported via downward compatibility of MSTP.
      DIP switches CONFIG, VLAN PRESET
      Indicators Front: POWER, LED MODE×4, PORT×8×2*, SFP×2 *The LED MODE button allows the PORT lamps to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN.
      Operating temperature 0 to 40°C
      Storage temperature –20 to 60°C
      Power supply (AC IN inlet) AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type
      Power supply (EXT DC INPUT inlet) External power supply requirements: 24VDC±2V, 1A, XLR-4-32 type Connector
      Maximum power consumption 11 W, 0.21 A
      Heat dissipation 9.5 kcal/h
      Chassis Metal case, no fan
      Hazardous substances management RoHS compliant
      Dimensions W 480mm
      H 44mm
      D 362mm
      Weight 4.2 kg
      Accessories Power code, Owner’s manual
      Options MMF-SWP1 (Optical expansion unit)


      Terminal Format Level Connector
      1-8 *1 1-8,13-16 *2 *3 IEEE802.3 10BASE-T/100BASE-TX/
      etherCON CAT5e
      9-12 *2 *3 IEEE802.3 10BASE-T/100BASE-TX/
      9,10 *4 17,18 *5 *8 IEEE802.3 1000BASE-SX opticalCON
      CONSOLE (RS-232C) RS-232C RJ-45 *6
      EXT DC INPUT XLR-4-32 type *7

      *1 SWP1-8MMF, SWP1-8
      *2 SWP1-16MMF
      *3 These terminals support AutoMDI/MDI-X
      *4 The SWP1-8MMF supports the option for port 10, and the SWP1-8 supports the option for both ports 9 and 10
      *5 The SWP1-16MMF supports the option for port 18
      *6 For the pin assignments, refer to CONNECTOR PIN ASSIGNMENTS
      *7 Pin 4=+24VDC, pin 1=GND, pins 2 and 3=N.C.
      External power supply requirements: 24VDC±2V, 1A
      *8 Conforming cable: GI-type multi-mode fiber cables with a core diameter /cladding diameter of approximately 50 μm/125 μm.
      Maximum cable length: 300 m

      Vekt 3 kg

      Yamaha Pro


      Det er ingen omtaler ennå.