Network switch equipped with eight etherCON ports and two option slots.
General specifications
General specifications | SWP1-16MMF | SWP1-8MMF | SWP1-8 | |
---|---|---|---|---|
Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T/etherCON connector) | 12 | 8 | 8 | |
Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T/RJ-45 connector) | 4 | – | – | |
Number of SFP ports (1000BASE-SX/opticalCON connector) | 2 (1 optical module is installed as standard) | 2 (1 optical module is installed as standard) | 2 (optical modules are not installed as standard) | |
Console port | 1 (RJ-45) | 1 (RJ-45) | 1 (RJ-45) | |
Automatic negotiation | Available | Available | Available | |
Auto MDI/MDI-X | Available | Available | Available | |
Switching capacity | 36 Gbit/s | 20 Gbit/s | 20 Gbit/s | |
Throughput | 27 Mpps | 15 Mpps | 15 Mpps | |
Maximum number of MAC addresses | 16,384 | 16,384 | 16,384 | |
Frame buffer | 1024 kB | 1024 kB | 1024 kB | |
VLAN | Port VLAN, Tag VLAN (IEEE802.1Q), Private VLAN | Port VLAN, Tag VLAN (IEEE802.1Q), Private VLAN | Port VLAN, Tag VLAN (IEEE802.1Q), Private VLAN | |
Maximum number of VLANs | 256 (VLAN ID 1–4,094) *VLAN ID 1 is the default VLAN ID. | 256 (VLAN ID 1–4,094) *VLAN ID 1 is the default VLAN ID. | 256 (VLAN ID 1–4,094) *VLAN ID 1 is the default VLAN ID. | |
IP multicast | IGMP Snooping (v1/v2/v3) | IGMP Snooping (v1/v2/v3) | IGMP Snooping (v1/v2/v3) | |
QoS | 8 egress queues, Policy-based QoS, Remarking (CoS, ToS, DSCP), Scheduling (SP, WRR) | 8 egress queues, Policy-based QoS, Remarking (CoS, ToS, DSCP), Scheduling (SP, WRR) | 8 egress queues, Policy-based QoS, Remarking (CoS, ToS, DSCP), Scheduling (SP, WRR) | |
Flow control | IEEE802.3x (Full-duplex), back pressure (Half-duplex) | IEEE802.3x (Full-duplex), back pressure (Half-duplex) | IEEE802.3x (Full-duplex), back pressure (Half-duplex) | |
Support functions | Storm control, HOL blocking prevention, Loop detection, ACL, SNMP agents, Link aggregation (IEEE 802.3ad LACP, Static), Spanning tree (STP*, RSTP*, MSTP), Port mirroring, Port shutdown, Link speed down shift, Packet counter, Power saving mode (IEEE802.3az EEE; Disabled in DANTE mode), DHCP client, Logging, Firmware download via TFTP/HTTP, Config file download via TFTP *STP and RSTP are supported via downward compatibility of MSTP. | Storm control, HOL blocking prevention, Loop detection, ACL, SNMP agents, Link aggregation (IEEE 802.3ad LACP, Static), Spanning tree (STP*, RSTP*, MSTP), Port mirroring, Port shutdown, Link speed down shift, Packet counter, Power saving mode (IEEE802.3az EEE; Disabled in DANTE mode), DHCP client, Logging, Firmware download via TFTP/HTTP, Config file download via TFTP *STP and RSTP are supported via downward compatibility of MSTP. | Storm control, HOL blocking prevention, Loop detection, ACL, SNMP agents, Link aggregation (IEEE 802.3ad LACP, Static), Spanning tree (STP*, RSTP*, MSTP), Port mirroring, Port shutdown, Link speed down shift, Packet counter, Power saving mode (IEEE802.3az EEE; Disabled in DANTE mode), DHCP client, Logging, Firmware download via TFTP/HTTP, Config file download via TFTP *STP and RSTP are supported via downward compatibility of MSTP. | |
DIP switches | CONFIG, VLAN PRESET | CONFIG, VLAN PRESET | CONFIG, VLAN PRESET | |
Indicators | Front: POWER, LED MODE×4, PORT×16×2*, SFP×2 *The LED MODE button allows the PORT lamps to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN. | Front: POWER, LED MODE×4, PORT×8×2*, SFP×2 *The LED MODE button allows the PORT lamps to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN. | Front: POWER, LED MODE×4, PORT×8×2*, SFP×2 *The LED MODE button allows the PORT lamps to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN. | |
Operating temperature | 0 to 40°C | 0 to 40°C | 0 to 40°C | |
Storage temperature | –20 to 60°C | –20 to 60°C | –20 to 60°C | |
Power supply (AC IN inlet) | AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type | AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type | AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type | |
Power supply (EXT DC INPUT inlet) | External power supply requirements: 24VDC±2V, 1A, XLR-4-32 type Connector | External power supply requirements: 24VDC±2V, 1A, XLR-4-32 type Connector | External power supply requirements: 24VDC±2V, 1A, XLR-4-32 type Connector | |
Maximum power consumption | 16 W, 0.29 A | 11 W, 0.21 A | 11 W, 0.21 A | |
Heat dissipation | 14.0 kcal/h | 9.5 kcal/h | 9.5 kcal/h | |
Chassis | Metal case, no fan | Metal case, no fan | Metal case, no fan | |
Hazardous substances management | RoHS compliant | RoHS compliant | RoHS compliant | |
Dimensions | W | 480mm | 480mm | 480mm |
H | 44mm | 44mm | 44mm | |
D | 362mm | 362mm | 362mm | |
Weight | 4.6 kg | 4.2 kg | 4.2 kg | |
Accessories | Power code, Owner’s manual | Power code, Owner’s manual | Power code, Owner’s manual | |
Options | MMF-SWP1 (Optical expansion unit) | MMF-SWP1 (Optical expansion unit) | MMF-SWP1 (Optical expansion unit) |
INTERFACE SPECIFICATIONS
Terminal | Format | Level | Connector |
---|---|---|---|
1-8 *1 1-8,13-16 *2 *3 | IEEE802.3 | 10BASE-T/100BASE-TX/ 1000BASE-T |
etherCON CAT5e |
9-12 *2 *3 | IEEE802.3 | 10BASE-T/100BASE-TX/ 1000BASE-T |
RJ-45 |
9,10 *4 17,18 *5 *8 | IEEE802.3 | 1000BASE-SX | opticalCON |
CONSOLE (RS-232C) | – | RS-232C | RJ-45 *6 |
EXT DC INPUT | – | – | XLR-4-32 type *7 |
*1 SWP1-8MMF, SWP1-8
*2 SWP1-16MMF
*3 These terminals support AutoMDI/MDI-X
*4 The SWP1-8MMF supports the option for port 10, and the SWP1-8 supports the option for both ports 9 and 10
*5 The SWP1-16MMF supports the option for port 18
*6 For the pin assignments, refer to CONNECTOR PIN ASSIGNMENTS
*7 Pin 4=+24VDC, pin 1=GND, pins 2 and 3=N.C.
External power supply requirements: 24VDC±2V, 1A
*8 Conforming cable: GI-type multi-mode fiber cables with a core diameter /cladding diameter of approximately 50 μm/125 μm.
Maximum cable length: 300 m
Omtaler
Det er ingen omtaler ennå.