|
Dante-MY cards convertor. Seven general routing presets, including routing between
|
|
|
General specifications
| General specifications | RSio64-D | |
|---|---|---|
| Sampling frequency rate | External | 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) |
| SRC | SRC Lock Range: 39.7 kHz – 101.7 kHz, Sample Rate Ratio Limit: 1:2.6 to 2.6:1 | |
| Power requirements | 100-240 V 50/60 Hz | |
| Power consumption | 60 W | |
| Dimensions | W | 480mm |
| H | 88mm | |
| D | 365mm | |
| Net weight | 6.1kg | |
| Accessories | Owner’s Manual, AC power cord | |
| Others | Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃ | |
Signal Delay
| SLOT IN (MY8-AE96) to SLOT OUT (MY8-AE96) (@ fs=96 kHz, SRC off, Internal routing) |
Less than 0.2 ms |
| SLOT IN (MY8-AE96) to Rio3224-D AES OUT (@ fs=48 kHz, through Dante, SRC off) (Dante Receive Latency set to 0.25 ms) |
Less than 0.8 ms |
| SLOT IN (MY8-AE96) to Rio3224-D AES OUT (@ fs=96 kHz, through Dante, SRC off) (Dante Receive Latency set to 0.25 ms) |
Less than 0.5 ms |
| SLOT IN (MY8-AE96) to Rio3224-D AES OUT (@ fs=96 kHz, through Dante, SRC on, SLOT fs=48 kHz) (Dante Receive Latency set to 0.25 ms) |
Less than 1.1 ms |
Digital I/O Characteristics
| Terminal | Format | Data length | Level | Audio | Connector |
|---|---|---|---|---|---|
| Primary/Secondary | Dante | 24 bit or 32 bit | 1000 BASE-T | 64 ch Input/64 ch Output@48 kHz 32 ch Input/32 ch Output@96 kHz |
etherCON CAT5e |
Control I/O Characteristics
| Terminal | Format | Level | Connector |
|---|---|---|---|
| WORD CLOCK IN | — | TTL/75 Ω terminated | BNC |
External DC Input Characteristics
| Terminal | Format | Level | Connector |
|---|---|---|---|
| EXT DC INPUT*1 | — | — | XLR-4-32 type*2 |
*1: Power Requirements: +24V±2V, 3A
*2: 1pin=GND, 2pin=NC, 3pin=NC, 4pin=+24V
Omtaler
Det er ingen omtaler ennå.