Yamaha RIO3224-D

kr 89 474,- (ink. mva)

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: RIO3224D Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

       

      I/O Rack. 32 analog inputs, 16 analog outputs, 4x2ch AES/EBU outputs.

      Specs:

      Model Rio3224-D Rio1608-D Ri8-D Ro8-D
      Sampling frequency rate External 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)
      48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)
      88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)
      96kHz: +4.1667%, +0.1%, -0.1%, -4.0%
      Signal delay Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz
      Total harmonic distortion Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz
      Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz
      INPUT to OUTPUT, Input Gain = Min.
      Frequency response +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz
      +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz
      Dynamic range 108dB typ., INPUT to OUTPUT, Input Gain = Min
      Crosstalk -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.
      Power requirements US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz
      Power consumption 120W 70W 35W 35W
      Dimensions W 480mm (18 7/8in) 480mm (18 7/8in) 480mm (18 7/8in) 480mm (18 7/8in)
      H 232mm (9 1/4in) 144mm (5 3/4in) 44mm (1 3/4in) 44mm (1 3/4in)
      D 362mm (14 1/4in) 361.5mm (14 1/4in) 362mm (14 1/4in) 359mm (14 1/8in)
      Net weight 12.4kg (27.3lb) 8.8kg (19.4lb) 4.5kg (9.9lbs) 4.4kg (9.7lbs)
      Accessories Dante Virtual Soundcard license sheet
      Others Temperature Range: Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃

      Analog input characteristics

      Input Terminals GAIN Actual Load
      Impedance
      For Use With
      Nominal
      Input Level Connector
      Nominal Max. before clip
      INPUT
      1-32 (Rio3224-D)
      1-16 (Rio1608-D)
      1-8 (Ri8-D)
      +66dB 7.5kΩ 50-600Ω Mics &
      600Ω Lines
      -62dBu (0.616mV) -42dBu (6.16mV) XLR-3-31 type (Balanced)*1
      -6dB +10dBu (2.45V) +30dBu (24.5V)

      *1. XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD) 
      *2. In these specifications, 0dBu = 0.775 Vrms. 
      *3. All input AD converters are 24bit linear, 128times oversampling. 
      *4. +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch.

      Analog output characteristics

      Output Terminals Actual Source
      Impedance
      For Use With
      Nominal
      Max.Output Level
      Select SW*4
      Output Level Connector
      Nominal Max. before clip
      OUTPUT
      1-16 (Rio3224-D)
      1-8 (Rio1608-D, Ro8-D)
      75Ω 600Ω Lines +24dB (default) +4dBu (1.23 V) +24dBu (12.3V) XLR-3-32 type (Balanced)*1
      +18dB -2dBu (616mV) +18dBu (6.16V)

      *1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD ) 
      *2. In these specifications, 0dBu = 0.775 Vrms. 
      *3. All output DA converters are 24bit, 128times oversampling. 
      *4. There are switches inside the body to preset the maximum output level. *5. Rio3224-D only

      Vekt 5 kg
      Produsent

      Yamaha Pro

      Omtaler

      Det er ingen omtaler ennå.

    Handlekurv