|
I/O Rack. 32 analog inputs, 16 analog outputs, 4x2ch AES/EBU outputs. Specs: |
| Model | Rio3224-D | Rio1608-D | Ri8-D | Ro8-D | |
|---|---|---|---|---|---|
| Sampling frequency rate | External | 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% |
|||
| Signal delay | Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz | ||||
| Total harmonic distortion | Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min. |
||||
| Frequency response | +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz |
||||
| Dynamic range | 108dB typ., INPUT to OUTPUT, Input Gain = Min | ||||
| Crosstalk | -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min. | ||||
| Power requirements | US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz | ||||
| Power consumption | 120W | 70W | 35W | 35W | |
| Dimensions | W | 480mm (18 7/8in) | 480mm (18 7/8in) | 480mm (18 7/8in) | 480mm (18 7/8in) |
| H | 232mm (9 1/4in) | 144mm (5 3/4in) | 44mm (1 3/4in) | 44mm (1 3/4in) | |
| D | 362mm (14 1/4in) | 361.5mm (14 1/4in) | 362mm (14 1/4in) | 359mm (14 1/8in) | |
| Net weight | 12.4kg (27.3lb) | 8.8kg (19.4lb) | 4.5kg (9.9lbs) | 4.4kg (9.7lbs) | |
| Accessories | Dante Virtual Soundcard license sheet | – | – | ||
| Others | Temperature Range: Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃ | ||||
Analog input characteristics
| Input Terminals | GAIN | Actual Load Impedance |
For Use With Nominal |
Input Level | Connector | |
|---|---|---|---|---|---|---|
| Nominal | Max. before clip | |||||
| INPUT 1-32 (Rio3224-D) 1-16 (Rio1608-D) 1-8 (Ri8-D) |
+66dB | 7.5kΩ | 50-600Ω Mics & 600Ω Lines |
-62dBu (0.616mV) | -42dBu (6.16mV) | XLR-3-31 type (Balanced)*1 |
| -6dB | +10dBu (2.45V) | +30dBu (24.5V) | ||||
*1. XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)
*2. In these specifications, 0dBu = 0.775 Vrms.
*3. All input AD converters are 24bit linear, 128times oversampling.
*4. +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch.
Analog output characteristics
| Output Terminals | Actual Source Impedance |
For Use With Nominal |
Max.Output Level Select SW*4 |
Output Level | Connector | |
|---|---|---|---|---|---|---|
| Nominal | Max. before clip | |||||
| OUTPUT 1-16 (Rio3224-D) 1-8 (Rio1608-D, Ro8-D) |
75Ω | 600Ω Lines | +24dB (default) | +4dBu (1.23 V) | +24dBu (12.3V) | XLR-3-32 type (Balanced)*1 |
| +18dB | -2dBu (616mV) | +18dBu (6.16V) | ||||
*1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )
*2. In these specifications, 0dBu = 0.775 Vrms.
*3. All output DA converters are 24bit, 128times oversampling.
*4. There are switches inside the body to preset the maximum output level. *5. Rio3224-D only
Omtaler
Det er ingen omtaler ennå.