Technical Specification of QL/CL
|
|
QL5 |
QL1 |
CL5 |
CL3 |
CL1 |
|
|
Mixing Capacity |
Input Mixing Channels |
64 mono + 8 stereo |
32 mono+ 8 stereo |
72 mono + 8 stereo |
64 mono + 8 stereo |
48 mono + 8 stereo |
|
Mix Buses |
16 |
24 |
||||
|
Matrix Buses |
8 (Input to Matrix supported) |
8 (Input to Matrix supported) |
||||
|
Stereo Bus |
1 |
1 |
||||
|
Mono |
1 |
1 |
||||
|
Cue |
1 |
1 |
||||
|
Local Connectors |
Analog Inputs |
32 |
16 |
8 |
||
|
Analog Outputs |
16 |
8 |
8 |
|||
|
MY Slots |
2 |
3 |
||||
|
Dante I/O |
Primary / Secondary |
Primary / Secondary |
||||
|
Digital Out |
1 (AES/EBU) |
1 (AES/EBU) |
||||
|
GPI |
5 in / 5 out |
5 in / 5 out (CL V1.11 or later) |
||||
|
Word Clock I/O |
Yes |
Yes |
||||
|
MIDI I/O |
In / Out |
In / Out |
||||
|
External Redundant PSU |
No |
Optional PW800W |
||||
|
Meter Bridge |
No |
Output meter built-in |
Optional MBCL |
|||
|
Ethernet |
Yes |
Yes |
||||
|
AC Inlet |
V-Lock Type |
V-Lock Type |
||||
|
Scene Memory |
Number of Scenes |
300 |
300 |
|||
|
Recall Safe |
Yes |
Yes |
||||
|
Focus Recall |
Yes |
Yes |
||||
|
Fade Time |
Yes (0s ~ 60s) |
Yes (0s ~ 60s) |
||||
|
Preview |
Yes |
Yes (CL V1.51 or later) |
||||
|
Selective Load / Save |
Yes |
Yes (CL V1.7 or later) |
||||
|
Tactile Control Keys |
No (on-screen) |
Yes |
||||
|
Input Channel Functions |
Gain Compensation |
Yes |
Yes |
|||
|
Digital Gain |
Yes (-96dB ~ +24dB) |
Yes (-96dB ~ +24dB) |
||||
|
ATT |
-96dB ~ 0dB |
-96dB ~ 0dB |
||||
|
HPF |
20Hz ~ 600Hz, -6 or -12dB/oct Selectable |
20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later) |
||||
|
PEQ |
4 Band Full PEQ (RTA overlay support in QL V3.0 or later) |
4 Band Full PEQ (RTA overlay support in CL V3.0 or later) |
||||
|
Dynamics 1 |
Gate / Ducking / Compressor / Expander |
Gate / Ducking / Compressor / Expander |
||||
|
Dynamics 2 |
Compressor / Compander-H / Compander-S / De-esser |
Compressor / Compander-H / Compander-S / De-esser |
||||
|
Input Delay |
Yes (0ms ~ 1000ms, frame delay support in QL V3.0 or later) |
Yes (0ms ~ 1000ms, frame delay support in CL V3.0 or later) |
||||
|
DCA Group |
16 (Output DCA support in QL V3.0 or later) |
16 (Output DCA and DCA Roll-Out support in CL V2.0 or later) |
||||
|
MUTE Group |
8 |
8 |
||||
|
Number of Inserts |
2 |
2 (CL V2.0 or later) |
||||
|
Direct Out |
Yes |
Yes |
||||
|
Output Channel Functions |
PEQ |
4 Band Full PEQ (RTA overlay support in QL V3.0 or later) |
4 Band Full PEQ (RTA overlay support in CL V3.0 or later) |
|||
|
Dynamics 1 |
Compressor / Expander / Compander-H / Compander-S |
Compressor / Expander / Compander-H / Compander-S |
||||
|
MUTE Group |
8 |
8 |
||||
|
Number of Inserts |
2 |
2 (CL V2.0 or later) |
||||
|
Premium Rack |
Number of Premium Racks |
8 |
8 |
|||
|
Mountable Device |
RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (QL V3.0 or later) |
RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (CL V3.0 or later) |
||||
|
Effect Rack |
Number of Effect Racks |
8 |
8 |
|||
|
Number of Effect Programs |
54 |
54 |
||||
|
Mountable Device |
Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (QL V3.0 or later) |
Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (CL V3.0 or later) |
||||
|
GEQ Rack |
Number of GEQ Racks |
8 |
16 |
|||
|
Mountable Device |
31BandGEQ / Flex15GEQ / Dugan Automixer / 8Band PEQ (CL V3.0 or later) |
31BandGEQ / Flex15GEQ / Dugan Automixer (CL V3.0 or later) / 8Band PEQ (CL V3.0 or later) |
||||
|
Dante |
Number of I/O Channels |
64 in / 64 out |
32 in / 32 out |
64 in / 64 out |
||
|
Dante Patch from Console |
Yes |
Yes |
||||
|
Recording |
USB Memory Recording |
Yes |
Yes |
|||
|
DVS Recording |
Yes (DVS and Nuendo Live bundled) |
Yes (DVS and Nuendo Live bundled) |
||||
|
Broadcast Functions |
5.1 Surround Panning |
Yes (QL V3.0 or later) |
Yes (CL V3.0 or later) |
|||
|
Surround Monitor |
Yes (QL V3.0 or later) |
Yes (CL V3.0 or later) |
||||
|
Mix Minus |
Yes (QL V3.0 or later) |
Yes (CL V3.0 or later) |
||||
|
L-Mono / R-Mono / LR-Mono |
Yes (QL V3.0 or later) |
Yes (CL V3.0 or later) |
||||
|
Other Functions |
Port to Port |
Yes |
No |
|||
|
RTA |
Yes (QL V3.0 or later) |
Yes (CL V3.0 or later) |
||||
|
Output Port Delay |
Yes (0ms ~ 1000ms, frame delay support in QL V3.0) |
Yes (0ms ~ 1000ms, frame delay support in CL V3.0) |
||||
|
Cascade |
Yes |
Yes (via MY slots) |
||||
|
User Level |
Yes |
Yes |
||||
|
Help File |
Yes |
Yes (CL V1.51 or later) |
||||
|
Oscillator |
Sine Wave 1ch / Sine Wave 2ch (QL V3.0 or later) / Pink Noise / Burst Noise |
Sine Wave 1ch / Sine Wave 2ch (CL V3.0 or later) / Pink Noise / Burst Noise |
||||
|
Channel Link |
Yes (Output Channel Link support in QL V3.0 or later) |
Yes (Output Channel Link support in CL V3.0 or later) |
||||
|
Channel Copy/Move |
Yes |
Yes |
||||
|
User Interface |
Display |
10 inch Touch Panel |
10 inch Touch Panel |
|||
|
Centralogic Section |
No |
Yes |
||||
|
Faders |
32 + 2 |
16 + 2 |
16 + 8 + 8 + 2 |
16 + 8 + 2 |
8 + 8+ 2 |
|
|
Selected Channel Encoders |
Gain, HPF, PEQ (controls for a selected band), Dynamics 1/2 (Threshold only), Pan |
Gain, HPF, PEQ (controls for 4 bands), Dynamics 1/2 (Threshold only), Pan, Mix/Matrix Sends |
||||
|
Channel Encoder |
No |
Yes (for Gain, Send Level, or an assigned parameter) |
||||
|
Channel Name / Color Display |
Yes |
Yes |
||||
|
Custom Fader Banks |
Yes (customized for all faders in a lump) |
Yes (customized for each fader section) |
||||
|
User Defined Keys |
12 (x 4 banks in QL V3.0 or later) |
16 (x 4 banks in CL V3.0 or later) |
||||
|
User Defined Knobs |
4 (on-screen) |
4 |
||||
|
Touch and Turn Knob |
Yes |
Yes (using a User Defined Knob) |
||||
|
Monitor Level Knob |
Yes (on-screen) |
Yes |
||||
|
Wooden Arm Rest |
No |
Yes |
||||
|
iPad Stay |
Yes |
No |
Yes |
No |
||
|
Rack-mounting |
No |
Yes |
No |
|||
|
Software |
Editor |
QL Editor (Win/Mac) |
CL Editor (Win/Mac) |
|||
|
StageMix |
QL StageMix (iPad app) |
CL StageMix (iPad app) |
||||
|
Console File Converter |
Yes (Win/Mac) |
Yes (Win/Mac) |
||||
General specifications QL5/ QL1
|
QL5 |
QL1 |
||
|
Sampling frequency rate |
Internal |
44.1kHz / 48kHz |
44.1kHz / 48kHz |
|
External |
44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) |
44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) |
|
|
Signal delay |
Less than 2.5ms, INPUT to OMNI OUT, Fs= 48kHz |
Less than 2.5ms, INPUT to OMNI OUT, Fs= 48kHz |
|
|
Fader |
100mm motorized, Resolution=1024steps, +10dB to –138dB, –∞dB all faders |
100mm motorized, Resolution=1024steps, +10dB to –138dB, –∞dB all faders |
|
|
Total harmonic distortion |
Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, INPUT to OMNI OUT, Input Gain= Min. |
Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, INPUT to OMNI OUT, Input Gain= Min. |
|
|
Frequency response |
+0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OMNI OUT |
+0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OMNI OUT |
|
|
Dynamic range |
112dB typ.: DA Converter / 108dB typ.: INPUT to OMNI OUT, Input Gain = Min. |
112dB typ.: DA Converter / 108dB typ.: INPUT to OMNI OUT, Input Gain = Min. |
|
|
Hum & noise level |
Equivalent input noise |
-128dBu typ., Equivalent Input Noise, Input Gain=Max |
-128dBu typ., Equivalent Input Noise, Input Gain=Max |
|
Residual output noise |
-88dBu, Residual output noise, ST master off |
-88dBu, Residual output noise, ST master off |
|
|
Crosstalk |
-100dB*1, adjacent INPUT/OMNI OUT channels, Input Gain = Min. |
-100dB*1, adjacent INPUT/OMNI OUT channels, Input Gain = Min. |
|
|
Power requirements |
100-240V 50/60Hz |
100-240V 50/60Hz |
|
|
Power consumption |
200W |
135W |
|
|
Dimensions |
W |
828mm(32.6in) |
468mm(18.4in ) |
|
H |
272mm(10.7in) |
272mm(10.7in) |
|
|
D |
563mm(22.2in) |
562mm(22.1in) |
|
|
Net weight |
21.8kg(48.1lb) |
14.7kg(32.4lb) |
|
|
Accessories |
Owner’s Manual, dust cover, power cord, DVS license sheet, Nuendo Live |
Owner’s Manual, power cord, DVS license sheet, Nuendo Live |
|
|
Options |
Mini-YGDAI cards *2 , Gooseneck Lamp LA1L |
Rackmount kit RK1, Mini-YGDAI cards *2 , Gooseneck Lamp LA1L |
|
|
Others |
Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃ |
Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃ |
|
Crosstalk@1kHz : A 22kHz, 30dB/Oct filter is used to measure crosstalk.
Total Harmonic Distortion : An 80kHz, 18dB/Oct filter is used to measure total harmonic distortion.
Hum & Noise : An A-Weight filter is used to measure hum &noise.
Analog input characteristics
|
Input Connectors |
GAIN |
Input |
Source |
Input level |
Connector |
||
|
Sensitivity*¹ |
Nominal |
Max. before clip |
|||||
|
INPUT |
+66dB |
7.5 kΩ |
50-600 Ω |
–82dBu |
–62dBu |
–42dBu |
XLR-3-31 |
|
–6dB |
–10dBu |
+10dBu |
+30dBu |
||||
*1. The sensitivity is the input level required for output at +4dBu (1.23V) or at the defined level when all the faders and level
controllers are set to the maximum value.
*2. XLR-3-31 connectors are balanced jacks (1=GND, 2=HOT, 3=COLD).
*3. 0dBu=0.775 Vrms for all specifications.
*4. All the AD converters use 24-bit linear/128-times oversampling.
*5. The INPUT connectors have +48V DC (phantom power) jacks, each of which can be turned on/off individually from the console software.
*6. QL1: INPUT1-16
Analog output characteristics
|
Output |
Output |
Load |
Maximum |
Output Level |
Connector |
|
|
Defined Level |
Maximum |
|||||
|
OMNI |
75 Ω |
600 Ω |
+24dB |
+4dBu |
vt+24dBu |
XLR-3-32 type |
|
+18dB |
–2dBu |
+18dBu |
||||
|
PHONES |
15 Ω |
8 Ω |
– |
75mW *6 |
150mW |
Stereo Phone |
|
40 Ω |
– |
65mW *6 |
150mW |
|||
*1. XLR-3-32 connectors are balanced jacks (1=GND, 2=HOT, 3=COLD).
*2. The PHONES connectors for stereo headphones are balanced jacks (Tip=LEFT, Ring=RIGHT, Sleeve= GND).
*3. 0 dBu=0.775 Vrms for all specifications.
*4. All the DA converters use 24-bit linear/128-times oversampling.
*5. The console has an internal switch for toggling the maximum output level.
*6. This is a value measured with the PHONES LEVEL knob set to 10 dB below the maximum position.
*7. QL1: OMNI OUT 1-8
Digital input/output specifications
|
Connectors |
Format |
Data length |
Level |
Audio |
Connector |
|
Primary/Secondary |
Dante |
24bit or 32bit |
1000Base-T |
64ch Input/64ch |
EtherCON Cat5e |
*1. QL1: 32ch Input/32ch Output@48kHz
Digital output specifications
|
Connectors |
Format |
Data length |
Level |
Connector |
|
|
DIGITAL OUT |
AES/EBU |
AES/EBU Professional Use |
24bit |
RS422 |
XLR-3-32 type (Balanced) *1 |
*1. XLR-3-32 connectors are balanced jacks (1=GND, 2=HOT, 3=COLD).
I/O SLOT (1-2) specifications
Each I/O Slot accepts a Mini-YGDAI card.
Only Slot 1 has a serial interfac
Control I/O characteristics
|
Connectors |
Format |
Level |
Connector |
|
|
MIDI |
IN |
MIDI |
– |
DIN Connector 5P |
|
OUT |
MIDI |
– |
DIN Connector 5P |
|
|
WORDCLOCK |
IN |
– |
TTL/75 Ω terminated |
BNC Connector |
|
OUT |
– |
TTL/75 Ω |
BNC Connector |
|
|
GPI (5IN/5OUT) |
– |
– |
D Sub Connector 15P(Female) *1 |
|
|
NETWORK |
IEEE802.3 |
10BASE-T/100Base-TX |
RJ-45 |
|
|
LAMP (QL5: x 2, QL1: x 1) |
– |
0V-12V |
XLR-4-31 type *2 |
|
|
USB HOST |
USB 2.0 |
– |
USB A Connector (Female) |
|
Omtaler
Det er ingen omtaler ennå.