Yamaha DBR10 10″ 2-veis aktiv høytaler

kr 5 585,- (ink. mva)

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: CDBR10 Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

       

      Bi-amped 2-way Speakersystem, 700W max, Class-D Amp, DSP, 129dB SPL, D-Contour, 10″+ 1″, (pc), ferrite magnet, 3x M8 Rigging Points 

       

      The DBR10 is the most compact model in its series and in its class. Capable of delivering a maximum SPL of 129dB from its compact enclosure, the DBR10 can be used as a utility speaker in a variety of environments.

       

       

      General specifications

      Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type
      Frequency range (-10dB) 55Hz – 20kHz
      Nominal coverage H 90°
      V 60°
      Components LF Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite
      HF Diaphragm:1″, Type: 1″ throat compression driver, Magnet:Ferrite
      Crossover 2.1kHz: FIR-X tuning™ (linear phase FIR filter)
      Output power Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W)
      Maximum output level (1m; on axis) 129dB SPL
      I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
      Processors D-CONTOUR: FOH/MAIN, MONITOR, OFF
      Heat dissipation Fan cooling, 4 speeds
      Power requirements 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
      Power consumption 60W(1/8 Power Consumption), 18W(Idle)
      Cabinet material Plastic
      Finish Black
      Handle Top x 1
      Flying and mounting hardware Bottom x 2 (Fit for M8 x 15 mm eyebolts)
      Pole socket 35mm (Bottom x 1)
      Dimensions W 308mm (12.1″)
      H 493mm (19.4″)
      D 289mm (11.4″)
      Net weight 10.5 kg (23.2 lbs)
      Vekt 14.00 kg
      Produsent

      Yamaha

      Omtaler

      Det er ingen omtaler ennå.

    Handlekurv