Yamaha CL5

kr 310 650,- (ink. mva)

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: CCL5 Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      Technical Specification of CL/QL

       

      CL5

      CL3

      CL1

      QL5

      QL1

      Mixing Capacity

      Input Mixing Channels

      72 mono + 8 stereo

      64 mono + 8 stereo

      48 mono + 8 stereo

      64 mono + 8 stereo

      32 mono+ 8 stereo

      Mix Buses

      24

      16

      Matrix Buses

      8 (Input to Matrix supported)

      8 (Input to Matrix supported)

      Stereo Bus

      1

      1

      Mono

      1

      1

      Cue

      1

      1

      Local Connectors

      Analog Inputs

      8

      32

      16

      Analog Outputs

      8

      16

      8

      MY Slots

      3

      2

      Dante I/O

      Primary / Secondary

      Primary / Secondary

      Digital Out

      1 (AES/EBU)

      1 (AES/EBU)

      GPI

      5 in / 5 out (CL V1.11 or later)

      5 in / 5 out

      Word Clock I/O

      Yes

      Yes

      MIDI I/O

      In / Out

      In / Out

      External Redundant PSU

      Optional PW800W

      No

      Meter Bridge

      Output meter built-in

      Optional MBCL

      No

      Ethernet

      Yes

      Yes

      AC Inlet

      V-Lock Type

      V-Lock Type

      Scene Memory

      Number of Scenes

      300

      300

      Recall Safe

      Yes

      Yes

      Focus Recall

      Yes

      Yes

      Fade Time

      Yes (0s ~ 60s)

      Yes (0s ~ 60s)

      Preview

      Yes (CL V1.51 or later)

      Yes

      Selective Load / Save

      Yes (CL V1.7 or later)

      Yes

      Tactile Control Keys

      Yes

      No (on-screen)

      Input Channel Functions

      Gain Compensation

      Yes

      Yes

      Digital Gain

      Yes (-96dB ~ +24dB)

      Yes (-96dB ~ +24dB)

      ATT

      -96dB ~ 0dB

      -96dB ~ 0dB

      HPF

      20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later)

      20Hz ~ 600Hz, -6 or -12dB/oct Selectable

      PEQ

      4 Band Full PEQ 
      (RTA overlay support in CL V3.0 or later)

      4 Band Full PEQ 
      (RTA overlay support in QL V3.0 or later)

      Dynamics 1

      Gate / Ducking / Compressor / Expander

      Gate / Ducking / Compressor / Expander

      Dynamics 2

      Compressor / Compander-H / Compander-S / De-esser

      Compressor / Compander-H / Compander-S / De-esser

      Input Delay

      Yes (0ms ~ 1000ms, frame delay support in CL V3.0 or later)

      Yes (0ms ~ 1000ms, frame delay support in QL V3.0 or later)

      DCA Group

      16 (Output DCA and DCA Roll-Out support in CL V2.0 or later)

      16 (Output DCA support in QL V3.0 or later)

      MUTE Group

      8

      8

      Number of Inserts

      2 (CL V2.0 or later)

      2

      Direct Out

      Yes

      Yes

      Output Channel Functions

      PEQ

      4 Band Full PEQ 
      (RTA overlay support in CL V3.0 or later)

      4 Band Full PEQ 
      (RTA overlay support in QL V3.0 or later)

      Dynamics 1

      Compressor / Expander / Compander-H / Compander-S

      Compressor / Expander / Compander-H / Compander-S

      MUTE Group

      8

      8

      Number of Inserts

      2 (CL V2.0 or later)

      2

      Premium Rack

      Number of Premium Racks

      8

      8

      Mountable Device

      RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (CL V3.0 or later)

      RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (QL V3.0 or later)

      Effect Rack

      Number of Effect Racks

      8

      8

      Number of Effect Programs

      54

      54

      Mountable Device

      Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (CL V3.0 or later)

      Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (QL V3.0 or later)

      GEQ Rack

      Number of GEQ Racks

      16

      8

      Mountable Device

      31BandGEQ / Flex15GEQ / Dugan Automixer (CL V3.0 or later) / 8Band PEQ (CL V3.0 or later) 
      (RTA overlay support in CL V3.0 or later)

      31BandGEQ / Flex15GEQ / Dugan Automixer / 8Band PEQ (CL V3.0 or later) 
      (RTA overlay support in QL V3.0 or later)

      Dante

      Number of I/O Channels

      64 in / 64 out

      64 in / 64 out

      32 in / 32 out

      Dante Patch from Console

      Yes

      Yes

      Recording

      USB Memory Recording

      Yes

      Yes

      DVS Recording

      Yes (DVS and Nuendo Live bundled)

      Yes (DVS and Nuendo Live bundled)

      Broadcast Functions

      5.1 Surround Panning

      Yes (CL V3.0 or later)

      Yes (QL V3.0 or later)

      Surround Monitor

      Yes (CL V3.0 or later)

      Yes (QL V3.0 or later)

      Mix Minus

      Yes (CL V2.0 or later)

      Yes (QL V3.0 or later)

      L-Mono / R-Mono / LR-Mono

      Yes (CL V3.0 or later)

      Yes (QL V3.0 or later)

      Other Functions

      Port to Port

      No

      Yes

      RTA

      Yes (CL V3.0 or later)

      Yes (QL V3.0 or later)

      Output Port Delay

      Yes (0ms ~ 1000ms, frame delay support in CL V3.0)

      Yes (0ms ~ 1000ms, frame delay support in QL V3.0)

      Cascade

      Yes (via MY slots)

      Yes

      User Level

      Yes

      Yes

      Help File

      Yes (CL V1.51 or later)

      Yes

      Oscillator

      Sine Wave 1ch / Sine Wave 2ch (CL V3.0 or later) / Pink Noise / Burst Noise

      Sine Wave 1ch / Sine Wave 2ch (QL V3.0 or later) / Pink Noise / Burst Noise

      Channel Link

      Yes (Output Channel Link support in CL V3.0 or later)

      Yes (Output Channel Link support in QL V3.0 or later)

      Channel Copy/Move

      Yes

      Yes

      User Interface

      Display

      10 inch Touch Panel

      10 inch Touch Panel

      Centralogic Section

      Yes

      No

      Faders

      16 + 8 + 8 + 2

      16 + 8 + 2

      8 + 8+ 2

      32 + 2

      16 + 2

      Selected Channel Encoders

      Gain, HPF, PEQ (controls for 4 bands), Dynamics 1/2(Threshold only), Pan, Mix/Matrix Sends

      Gain, HPF, PEQ (controls for a selected band), Dynamics 1/2(Threshold only), Pan

      Channel Encoder

      Yes (for Gain, Send Level, or an assigned parameter)

      No

      Channel Name / Color Display

      Yes

      Yes

      Custom Fader Banks

      Yes (customized for each fader section)

      Yes (customized for all faders in a lump)

      User Defined Keys

      16 (x 4 banks in CL V3.0 or later)

      12 (x 4 banks in QL V3.0 or later)

      User Defined Knobs

      4

      4 (on-screen)

      Touch and Turn Knob

      Yes (using a User Defined Knob)

      Yes

      Monitor Level Knob

      Yes

      Yes (on-screen)

      Wooden Arm Rest

      Yes

      No

      iPad Stay

      Yes

      No

      Yes

      No

      Rack-mounting

      No

      No

      Yes

      Software

      Editor

      CL Editor (Win/Mac)

      QL Editor (Win/Mac)

      StageMix

      CL StageMix (iPad app)

      QL StageMix (iPad app)

      Console File Converter

      Yes (Win/Mac)

      Yes (Win/Mac)

      Input Terminals

      GAIN

      Actual Load
      Impedance

      For use with nominal

      Input level

      Connector

      Sensitivity*¹

      Nominal

      Max. before clip

      OMNI IN 1-8

      +66dB

      7.5kΩ

      50-600Ω Mics &
      600Ω Lines

      -82dBu (61.6μV)

      -62dBu (0.616mV)

      -42dBu (6.16mV)

      XLR3-31 type (Balanced)*²

      -6dB

      -10dBu (245mV)

      +10dBu (2.45V)

      +30dBu (24.5V)

      TALKBACK

      +64dB

      10kΩ

      50-600Ω Mics &
      600Ω Lines

      -70dBu (0.245mV)

      -60dBu (0.775mV)

      -40dBu (7.75mV)

      XLR3-31 type(Balanced)*²

      +20dB

      -26dBu (38.8mV)

      -16dBu (0.123V)

      +4dBu (1.23V)

      *1. Sensitivity is the lowest level that will produce an output of +4dBu(1.23V) or the nominal output level when the unit is set to maximum gain.(all faders and level controls are maximum position.)
      *2. XLR-3-31 type connectors are balanced..(1=GND, 2=HOT, 3=COLD)
       
      *3. In these specifications, 0dBu = 0.775 Vrms.
       
      *4. All input AD converters are 24bit linear, 128times oversampling.
      *5. +48V DC ( phantom power ) is supplied to OMNI IN (1-8) and TALKBACK XLR type connectors via each individual software controlled switches.

      Analog output characteristics

      Output Terminals

      Actual Source
      Impedance

      For Use With
      Nominal

      GAIN SW*5

      Output Level

      Connector

      Nominal

      Max. before clip

      OMNI OUT 1-8

      75Ω

      600Ω Lines

      +24dB (default)

      +4dBu (1.23 V)

      +24dBu (12.3 V)

      XLR-3-32 type(Balanced)*1

      +18dB

      -2dBu (616mV)

      +18dBu (6.16V)

      PHONES

      15Ω

      8Ω Phones

      75mW*6

      150mW

      Stereo Phone Jack (TRS) (Unbalanced)*2

      40Ω Phones

      65mW*6

      150mW

      *1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD ) 
      *2. PHONES stereo phone jack is unbalanced.( Tip=LEFT, Ring=RIGHT, Sleeve=GND )
       
      *3. In these specifications, 0dBu = 0.775 Vrms.
      *4. All output DA converters are 24bit, 128times oversampling.
       
      *5. There are switches inside the body to preset the maximum output level.
       
      *6. The position of the level control is 10dB lowered from Max.

      Digital Input & Output Characteristics

      Terminal

      Format

      Data length

      Level

      Audio

      Connector

      Primary/Secondary

      Dante

      24bit or 32bit

      1000Base-T

      64ch Input/64ch Output @48kHz

      etherCON Cat5e

      Digital Output Characteristics

      Terminal

      Format

      Data length

      Level

      Connector

      DIGITAL OUT

      AES/EBU

      AES/EBU Professional Use

      24bit

      RS422

      XLR-3-32 type (Balanced)*1

      *1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)

      I/O Slot (1-3) Characteristics

      Each I/O Slot accepts a Mini-YGDAI card. Only Slot1 has a serial interface.

      Control I/O characteristics

      Terminal

      Format

      Level

      Connector

      MIDI

      IN

      MIDI

      DIN Connector 5P

      OUT

      MIDI

      DIN Connector 5P

      WORD CLOCK

      IN

      TTL/75Ω terminated

      BNC Connector

      OUT

      TTL/75Ω

      BNC Connector

      GPI (5IN/5OUT)

      D-Sub Connector 15P (Female) *1

      NETWORK

      IEEE802.3

      10BASE-T/100Base-TX/

      RJ-45

      LAMP (CL5=3, CL3=2, CL1=1)

      0V – 12V

      XLR-4-31 type *2

      USB HOST

      USB 2.0

      USB A Connector (Female)-

      Meter Bridge (CL3/CL1 only)

      D-Sub Connector 9P (Female)-

      *1. Input pins: Internal TTL-level pull-up resistors provided (47kΩ). Output pins: Open-drain output (Vmax = 12V, max. sink current/pin = 75mA) Power pins: Output voltage Vp = 5V, max. output current Imax = 300mA
      *2. Pin 4 = +12V, Pin 3 = GND, lamp rating 5W. Software voltage control.

      Rio3224-D, Rio1608-D

      General specifications

      Rio3224-D

      Rio1608-D

      Sampling frequency rate

      Internal

      44.1kHz, 48kHz, 88.2kHz, 96kHz

      44.1kHz, 48kHz, 88.2kHz, 96kHz

      External

      44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0%

      44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0%

      Signal delay

      Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz

      Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz

      Total harmonic distortion

      Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min.

      Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min.

      Frequency response

      +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz

      +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz

      Dynamic range

      108dB typ., INPUT to OUTPUT, Input Gain = Min

      108dB typ., INPUT to OUTPUT, Input Gain = Min

      Crosstalk

      -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.

      -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.

      Power requirements

      US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz

      US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz

      Power consumption

      120W

      70W

      Dimensions

      W

      480mm (18 7/8in)

      480mm (18 7/8in)

      H

      232mm (9 1/4in)

      144mm (5 3/4in)

      D

      361.5mm (14 1/4in)

      361.5mm (14 1/4in)

      Net weight

      12.4kg (27.3lb)

      8.8kg (19.4lb)

      Others

      Temperature Range: Operating temperature range: 0 – 40, Storage temperature range: -20 – 60

      Temperature Range: Operating temperature range: 0 – 40, Storage temperature range: -20 – 60

      Analog input characteristics

      Input Terminals

      GAIN

      Actual Load
      Impedance

      For Use With
      Nominal

      Input Level

      Connector

      Nominal

      Max. before clip

      INPUT 1-32 (Rio3224-D)
      1-16 (Rio1608-D)
      1-8 (Ri8-D)

      +66dB

      7.5kΩ

      50-600Ω Mics &
      600Ω Lines

      -62dBu (0.616mV)

      -42dBu (6.16mV)

      XLR-3-31 type (Balanced)*1

      -6dB

      +10dBu (2.45V)

      +30dBu (24.5V)

      *1. XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD) 
      *2. In these specifications, 0dBu = 0.775 Vrms.
       
      *3. All input AD converters are 24bit linear, 128times oversampling.
       
      *4. +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch.

      Analog output characteristics

      Output Terminals

      Actual Source
      Impedance

      For Use With
      Nominal

      Max.Output Level
      Select SW*4

      Output Level

      Connector

      Nominal

      Max. before clip

      OUTPUT 1-8

      75Ω

      600Ω Lines

      +24dB (default)

      +4dBu (1.23 V)

      +24dBu (12.3V)

      XLR-3-32 type (Balanced)*1

      +18dB

      -2dBu (616mV)

      +18dBu (6.16V)

      OUTPUT 9-16*5

      75Ω

      600Ω Lines

      +24dB (default)

      +4dBu (1.23 V)

      +24dBu (12.3V)

      XLR-3-32 type (Balanced)*1

      +18dB

      -2dBu (616mV)

      +18dBu (6.16V)

      *1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD ) 
      *2. In these specifications, 0dBu = 0.775 Vrms.
       
      *3. All output DA converters are 24bit, 128times oversampling.
       
      *4. There are switches inside the body to preset the maximum output level.
      *5. Rio3224-D only

      Digital Input & Output Characteristics

      Terminal

      Format

      Data length

      Level

      Audio

      Connector

      Primary/Secondary

      Dante

      24bit or 32bit

      1000Base-T

      24ch Input/32ch Output (Rio3224-D) 8ch Input/16ch Output (Rio1608-D) 8ch Output (Ri8-D) 8ch Input (Ro8-D)

      etherCON Cat5e (Rio3224-D, Rio1608-D) RJ-45 (Ri8-D, Ro8-D)

      Digital Output Characteristics

      Terminal

      Format

      Data length

      Level

      Connector

      AES/EBU OUT 1-4*1

      AES/EBU

      AES/EBU Professional Use

      24bit

      RS422

      XLR-3-32 type (Balanced)*2

      *1 Rio3224-D only
      *2. XLR-3-32 type connectors are balanced.(
      1=GND, 2=HOT, 3=COLD )

       

       

      Vekt 40 kg
      Produsent

      Yamaha Pro

      Omtaler

      Det er ingen omtaler ennå.

    Handlekurv