Shure 18-inch gooseneck cardioid XLR Shock Mount

kr 3 685,- (ink. mva)

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: MX418C-BEN Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      Cardioide. 18″. Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen.
      Shures Microflex® svanehalsmikrofoner (412/418) er en svært fleksibel mikrofonserie. Tilgjengelige med cardioid, supercardioid og omnidirectional karakteristikk. Utskiftbare elementer med bred frekvensrespons og nøyaktig lydreproduksjon for en mengde type applikasjoner som kirker, samfunnshus, rettsaler, konferansesenter med flere.

      Modeller

      MX412 12″ (304.8 mm) Svanehals. Se tilgjengelige variasjoner under.
      MX418 18″ (457.2 mm) Svanehals. Se tilgjengelige variasjoner under.
      MX412S Inkluderer Mute-bryter og LED indikator. Se tilgjengelige variasjoner under.
      MX418S Inkluderer Mute-bryter og LED indikator. Se tilgjengelige variasjoner under.
      MX412SE Inkluderer 10′ (3 m) side- (eller under-) kabel. Se tilgjengelige variasjoner under.
      MX418SE Inkluderer 10′ (3 m) side- (eller under-) kabel. Se tilgjengelige variasjoner under.
      MX412D Svanehals for bord. Inkluderer base og kabel. Se tilgjengelige variasjoner under.
      MX418D Svanehals for bord. Inkluderer base og kabel. Se tilgjengelige variasjoner under.

      Tilgjengelige variasjoner
      Serien er tilgjengelig i en variasjon av flere lenger og monteringsalternativer. Modellene S/C, S/S, og S/N inkluderer en Mute-bryter med LED indikator.

      C = Cardioid, S = Supercardioid, N = No Cartridge

      Gooseneck Microphones
      MX412/C
      MX412/S
      MX412/N 12″ Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen

      MX418/C
      MX418/S
      MX418/N 18″ Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen

      MX412S/C
      MX412S/S
      MX412S/N 12″ Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator

      MX418S/C
      MX418S/S
      MX418S/N 18″ Attached XLR Preamp, Shock & Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator

      MX412SE/C
      MX412SE/S
      MX412SE/N 12″ In-Line Preamp, Shock & Flange Mount, 10′ Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen

      MX418SE/C
      MX418SE/S
      MX418SE/N 18″ In-Line Preamp, Shock & Flange Mount, 10′ Side- (or Bottom-) Exit Cable, Snap-Fit Foam Windscreen

      Desktop Gooseneck Microphones
      MX412D/C
      MX412D/S
      MX412D/N 12″ Desktop Base with 10′ Cable, Logic Functions, Programmable Switch, LED Indicator, Snap-Fit Foam Windscreen

      MX418D/C
      MX418D/S
      MX418D/N 18″ Desktop Base with 10′ Cable, Logic Functions, Programmable Switch, LED Indicator, Snap-Fit Foam Windscreen

      • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrumInterchangeable cartridges provide the right polar pattern for every application • Balanced, transformerless output for increased immunity to electromagnetic hum and RF interference over long cable runs • Shock mount provides over 20 dB isolation from surface vibration noise • Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables • Snap-fit foam windscreen • Programmable on/off switch and LED on/off indicator (MX412D/MX418D) • New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D) • Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D) • Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE) • Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)
      Vekt 1 kg
      Produsent

      Shure

      Omtaler

      Det er ingen omtaler ennå.

    Handlekurv