The sturdy on-table boundary layer microphone MEB 114 constitutes an improvement for any conferencing system. In its –S version it additionally features a programmable microphone button (PTT, PTM, toggle ON/off, permanent on), and a bi-color LED ring for status indication. A camera or media control system can be triggered via the TTL logic out on the bottom side. Thanks to its rugged housing and its high-quality microphone capsule the MEB 114 ensures the best speech intelligibility.
Sennheiser MEB 114-S B
kr 4 475,- (ink. mva)
Boundary microphone, cardioid, 3-pin mini-XLR-M, 24-48 V phantom power, TTL logic output, button with illuminated ring, black
Bestillingsvare
FRAKTPRISER FRA 99,-
(Gjelder ikke varer over 35 kg)
Ikke på lager, kontakt oss for bestilling og leveringstid.
- Beskrivelse
- Spesifikasjoner
- Tilleggsinformasjon
| Dimensions | 85 x 100 x 25 mm (WxDxH) |
| Connector | clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal) |
| Frequency response | 40 Hz – 20 kHz |
| Max. sound pressure level | 140 dB |
| Transducer principle | pre-polarized condenser microphone |
| Weight | 291 g |
| Pick-up pattern | cardioid |
| Nominal impedance | 200 Ω |
| Phantom powering | P 24 - P 48 |
| Operating temperature | -10 ° … +50 °C |
| Equivalent noise level | 29 dB (A) |
| Equivalent noise level weighted as per CCIR 468-3 | 39 dB (CCIR) |
| Current consumption | 5.3 mA |
| Output voltage | High level output voltage > 2.4 V, low level output voltage < 0.4 V |
| Vekt | 1 kg |
|---|---|
| Produsent | Sennheiser |




