SCHERTLER DYN-M

kr 5 890,- (ink. mva)

Bestillingsvare

Legg til ønskelisteFjern fra ønskeliste
Legg til ønskeliste

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: DYN-M-P48 Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      THE SCHERTLER DYN-M P48 IS UNLIKE ANY OTHER PICKUP ON THE MARKET

      Nearly all mandolin pickups use one of two technologies: magnetic or piezo, both of which color the sound in ways that produce a sound that is unnatural, and often harsh and irritating. The Schertler DYN-M P48 is unique in that it uses electrodynamic technology that yields the most natural possible sound, producing a transparent, accurate reproduction of your instrument.
       

      THE SCHERTLER DYN-M P48 IS EASY TO USE AND REQUIRES NO PERMANENT INSTALLATION

      The Schertler DYN-M P48 easily mounts to any mandolin using the supplied, reusable finish friendly putty. It takes just seconds to mount and can be easily removed and stored in your instrument case when not in use. Since no permanent installation is required, the Schertler DYN-M P48 can be used on any instrument you own, removing the need to outfit each instrument with its own pickup. Also, the movable nature of this pickup allows you to achieve an endless variety of tonal characteristics by placing the pickup in different locations on the top back, or even inside your instrument. This microphone is additionally recommended for use with Sitar, Oud, Saz and other similar ethnic instruments

       

      THE SCHERTLER DYN-M P48 IS DESIGNED TO PRODUCE THE WARMEST, CLEAREST TONE.

      The Schertler DYN-M P48 is equipped with a balanced, XLR cable that minimizes noise and RF interference. The pickup is constructed using Class A electronics which result in the most detailed and satisfying tone possible. This pickup requires 48V phantom power. When used in conjunction with a Schertler amplifier or preamp such as the Schertler Yellow Single, Schertler’s proprietary RESON control will reduce feedback and improve the tone, allowing for as much as 25% more volume before feedback.

      Output impedance 4.7 Kohm @ 1 KHz
      Frequency Response 20 Hz to 20 kHz
      Dynamic range 139 dB, 145 dB typical
      Sensitivity (on instrument) ca. -30 dB
      Sensitivity (theoretical) -62 dB/@ 1um ampl.
      Mechanical decoupling Butterworth 2nd order, Q=6
      Temperature range -20° C to +70° C
      Minimum operating voltage 22 VDC
      Active EQ Customized for each instrument
      Electronics all Class-A
      Contacts All hard gold plated 0.5 mm
      Connection Custom XLR balanced

      Vekt 1 kg
      Featured

      No
      Produsent

      Schertler

      Omtaler

      Det er ingen omtaler ennå.

    Relaterte produkter

    Handlekurv