PROLIGHTS HALUROCK Led wash

HALUROCK is a highly innovative projector that redefines the traditional concept of moving head and pixel matrix, adding a new dimension in the light design of every stage. HALUROCK combines in a single projector an explosive output, pixel2pixel control and movements, providing a new and original tool to the light-designers to freely open the creativity. The optical group of HALUROCK develops light beams of 8 °, thin as pins, capable of channeling light in a projection with unpreedent brightness and highly directive, creating volumetric effects and graphics in the air. The HALUROCK light source is based on 49 (7×7 matrix) high-lumen CREE Warm White LEDs, with a 2800K° color temperature which recalls the classic effect of the halogen lamp in rock concerts.The electronics offers several advanced features such as a precise and linear management of dimmer, high resolution black-OLED display, and both DMX and Art-Net control protocol on board.

 

Light source and optics

 

    49 (7×7) x 3W CREE high-efficiency WarmWhite LEDs
    Color temperature: 2800K°
    Beam angle: 6°
    Field angle: 8°
    LEDs average life span: >50’000 h

 

Dimmer/Strobe

 

    0-100% linear dimmer
    4 different dimming curves available
    Independent shutter and fading effects with adjustable speed
    Strobe: Electronic, 1-20 flash per second

 

Electronics

 

    High reoslution black-OLED display for simplified access to control menu, configuration and DMX addressing

 

    3 DMX configurations available: 11/55/60 channels for full flexibility and control

 

    Both DMX and Art-Net control protocol supported
    Auto mode: built-in programs with execution speed adjustment
    Master/Slave mode: for synchronized operation of more units linked in a chain
    Unit reset: through control panel or via DMX
    Linear and “stepless” transition between DMX values
    Flicker-free operations (>400Hz)

 

Structure and moving body

 

    Internal protection: IP20
    Cooling: forced ventilation with low-noise fans, no heat generation
    Power cable (shuko 1,5mt) included
    3phase motor for precise and ultra-fast moves
    Motion Angle: Pan = 540° Tilt = 220°
    Pan/Tilt resolution: 8-bit or 16-bit:
    Pan = 2,10° Pan Fine = 0,008° Tilt = 1,05° Tilt Fine = 0,004°
    Suspension and fixing: any possible working position through «quick lock» omega brackets (included)

 

Power supply

 

    Power supply: 100-240V 50/60Hz
    IN/OUT power wiring and signal (DMX and ArtNet) through connections XLR3p-5p/ EtherCON /Powercon
    Power output allowing up to 8 units to be connected on a single power line (at 230V)
    Max power consumption: 202W

 

Weight and dimensions

 

    Weight: 14 kg
    Dimensions (WxHxD): 379x471x288 mm