Montarbo WIND2200

kr 42 495,- (ink. mva)

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: F000504 Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      Nettverkskontrollerbar aktiv biampet fulltone høyttaler 2*10″ +3″. Innebygget aktivt delefilter, DSP, digitale forsterkere og superventilerte neodymium magneter.

       

      Høyttaleren er basert på samme prisipper som et line-array element har.

       

      Info:

      Networkable self-powered 2 way full-range speaker system equipped with two 10» woofers and one HF driver. The woofers are custom built long excursion 3» voice-coils with super-vented neodymium magnets (in order to minimize the power compression effect) in a symmetrical (D’Appolito) configuration. This is the only configuration that permits both simmetrical polar response and full acoustic sum of the woofers in all the working frequency range. The HF driver is a 3» voice-coil with neodimium magnet (the same premium and renowned driver in use in the RA16 and SPOT2500). Wind2200 is powered by two class D amplifiers and controlled by a new generation of Montarbo DSP loudspeaker processor which provides FIR – IIR filtering with innovative solutions, audio digital link by AES-EBU standard with sample rate converter and custom network to remote control of speaker system.

       

      135 dB continuous SPL.

      2×10» woofer with 3» voice coil.

      HF driver with a 1.4» throat and a 3» voice coil,

      Wide dispersion (60° H x 40° V) constant directivity horn.

      Montarbo DSP, 24 bit high-performance converters, FIR filters.

      PPF system: Parallel Processing FIR algorithm.

      CCDE system: Cascode Conversion for Dynamic Extension.

      24 dBu of headroom level input.

      Montarbo network to remote control.

      Digital audio in-out AES-EBU. 

      Class-D amplifiers continuos 2000W.

      Birch plywood cabinet, finished with anti-abrasion paint.

       

      APPLICATIONS

      Main sound system in big clubs, big theatres and open spaces.

      High quality long throw system.

      Fixed and semi-permanent installations.

      Front-fill and side-fill reinforcement, for speech reinforcement, 

      for conventions or conferences.

      The wide dispersion allows for uniform coverage of the audience, 

      even when using a single system per side (FOH).

       

      TECHNICAL SPECIFICATIONS

       

      Enclosure

      2-way bass-reflex

      Components

      Custom-designed according to Montarbo® specifications

      LF

      2 x 10″ woofers (3″ voice coil)

      HF

      1 x compression driver (1.4″ throat, 3″ voice coil)

      Constant directivity horn (80° H x 60° V)

      Frequency response

      55 ÷ 20.000 Hz

      Continuous SPL

      135 dB

      Electronic cross-over

      900 Hz

      Built-in amplifier

      2 class-D power units

      LF power

      2000W

      HF power

      500W

      Built-in DSP

      Montarbo®, 24bit conv.

      FIR filters

      Connections and controls

      Line input (balanced XLR) with Volume control

      Line link

      Digital input

      Digital link (balanced XLR)

      In-out remote control (RJ45)

      Switchable analog/ digital input

      Preset select switch

      Status LED indicators (on, signal, clipping, thermal warning protection, number preset, analog/digital input)

      Construction

      Birch plywood coated with high-impact and chip resistant paint

      2 mm steel protection grille with foam

      Fittings

      Carrying handle

      Speaker-stand adapter

      Dimensions (WxHxD)

      358 x 866 x 400 mm

      Weight

      32 kg

       

      Vekt 34 kg
      Innebygget mikrofon

      Nei

      Produsent

      Montarbo

      Vibrarm

      Nei

      Omtaler

      Det er ingen omtaler ennå.

    Handlekurv