Montarbo W28As

kr 43 200,- (ink. mva)



(Gjelder ikke varer over 35 kg)

Varenummer: F000343 Kategorier: ,

Ikke på lager, kontakt oss for bestilling og leveringstid.

      Montarbo W28As

      W28As kompletterer Montarbos produktlinje med high-end aktive høyttalere, tilegnet det profesjonelle markedet. Den er kapabel til å yte det som trengs i enhver applikasjon. Den er idèel til situsjoner der det trengs et ekstremt lydtrykk, høy definisjon og ren uforvrengt lyd. Musikere og utleiefirmaer er garantert en behagelig hverdag, og kommer til å bli fornøyd med dette produktet. De innebygde forsterkerne og prosessorene, er optimert for å gi et ekstremt lydtrykk samtidig som den rene lyden blir bevart uten forvrengning.


      2-Way Active Bi-amplified Speaker


      W28As completes our range of top level performance loudspeaker systems designed specifically for the professional applications. Capable of providing outstanding sound performance in the most diverse situations, W28As is ideally suited to applications requiring high sound pressure levels, maximum definition and clean sound. Musicians and rental companies alike are going to be satisfied with this product.
      The built-in amplifiers and control electronics are optimized for the transducers enabling the system to produce power with a flat response and extremely low distortion.

      • High sound pressure levels, response extended to the extremes of the range, very low distortion, cleanness of the medium range, high dynamics.

      • 137 dB max SPL.

      • 2 class AB MosFet power amplifiers deliver a total output power of 1200 W (LF 900 W, HF 300 W).

      • 2 indipendent dedicated dynamic processors

      • Active cross-over filter (24 dB/oct Linkwitz-Riley, 900 Hz).

      • 2 x 15” woofers, 3” voice coil, with lightweight neodymium magnet

      • 2” neodymium compression driver – with titanium diaphragm and
      a 4” voice coil.

      • 60° x 40° constant directivity horn.

      • Trapezoidal cabinet, reinforced with internal steel braces, made from high grade phenyl-glued multiply birch and finished with highly resistant antiscratch polyurethane black paint.

      • W28As may be flown using industry standard flying hardware. It embodies on both sides slide guides for standard anchor rings to allow the loudspeaker suspension. On its rear side there are two recessed rings for tilt adjustment of the suspended speaker.

      • Stand adapter; ergonomically designed side handles for easy transportation and set-up.



      • Suitable for the most demanding professional requirements in the

      most diverse situations, for both indoor and outdoor use.

      • Stadiums, arenas

      • Concert halls

      • Medium-to-large theatres

      • Medium-to-large night clubs

      • Large-scale events


      2-way bass-reflex

      Frequency response

      45 Hz ÷ 20 kHz

      Sensitivity (1W,1m)

      106 dB

      Max SPL

      137 dB

      Components (custom)

      2 x 15″ neodymium magnet high efficiency woofers with 3″ voice coil;
      2″ neodymium compresson driver
      (titanium diaphragm and 4” voice coil) constant directivity horn (60°H x 40°V)

      Electronic crossover

      900Hz / 24dB Oct. (Linkwitz-Riley)


      High grade phenyl-glued multiply birch.
      Internal steel braces.
      Slide guides for standard anchor ring.
      Recessed rings for the inclination adjustment.
      Powder painted steel protection grille.
      Side handles.
      Stand adapter


      2 MosFet, class AB, amps controlled by
      2 independent active, dynamic processors

      Max. output power

      900 + 300 W (8 ohms / 0,1% THD)
      Bass: 900 W
      Mid/High: 300 W


      Balanced XLR input and output (link) wired
      in parallel Mains power connector Neutrik PowerCon®

      Dimensions (WxHxD)

      48 x 109,6 x 40 cm


      52.7 kg


      Vekt 55 kg
      Innebygget mikrofon







      Det er ingen omtaler ennå.