Montarbo W24As

kr 38 550,- (ink. mva)

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: F000374 Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      Montarbo W24As

      Designet for å gi et utsøkt lydbilde i alle situsjoner. W24A er idèell i applikasjoner der det kreves høye lydtrykk, maksimum definisjon og klar lyd. Musikere og utleiefirmaer er garantert en behagelig hverdag. De innebygde forsterkerne og prosessorene, er optimert for å gi et ekstremt lydtrykk samtidig som den rene lyden blir bevart uten forvrengning.

       

       

      Designed to provide outstanding sound performance in the most diverse situations, W24As is ideally suited to applications requiring high sound pressure levels, maximum definition and clean sound. Musicians and rental companies alike are going to be satisfied with this product.
      The built-in amplifiers and control electronics are optimized for the transducers enabling the system to produce power with a flat response and extremely low distortion.

      • Typical features of much bulkier, heavier systems: high sound pressure levels, response extended to the extremes of the range,
      very low distortion, cleanness of the medium range, high dynamics.

      • 134 dB max SPL.

      • 2 class AB MosFet power amplifiers deliver a total output power of 1050 W (LF 800 W, HF 250 W).

      •  2 indipendent dedicated dynamic processors

      • Active cross-over filter (24 dB/oct Linkwitz-Riley, 1000 Hz).

      • 2 x 12” woofers, 3” voice coil, with lightweight neodymium magnet assemblies.

      • 2” neodymium compression driver – with titanium diaphragm and
      a 3” voice coil.

      • 60° x 40° constant directivity horn.

      • Trapezoidal cabinet, reinforced with internal steel braces, made from high grade phenyl-glued multiply birch and finished with highly resistant antiscratch polyurethane black paint.

      • W24As may be flown using industry standard flying hardware.
      It embodies on both sides slide guides for standard anchor rings to allow the loudspeaker suspension. On its rear side there are two recessed rings for tilt adjustment of the suspended speaker.

      • Stand adapter; ergonomically designed side handles for easy transportation and set-up.

       

      Applications

      • Suitable for the most demanding professional requirements in the most diverse situations, for both indoor and outdoor use.

      • Stadiums, arenas

      • Concert halls

      • Medium-to-large theatres

      • Medium-to-large night clubs

      • Large-scale events

      2-Way Active Bi-amplified Speaker

      features

      Designed to provide outstanding sound performance in the most diverse situations, W24As is ideally suited to applications requiring high sound pressure levels, maximum definition and clean sound. Musicians and rental companies alike are going to be satisfied with this product.
      The built-in amplifiers and control electronics are optimized for the transducers enabling the system to produce power with a flat response and extremely low distortion.

      • Typical features of much bulkier, heavier systems: high sound pressure levels, response extended to the extremes of the range,
      very low distortion, cleanness of the medium range, high dynamics.

      • 134 dB max SPL.

      • 2 class AB MosFet power amplifiers deliver a total output power of 1050 W (LF 800 W, HF 250 W).

      •  2 indipendent dedicated dynamic processors

      • Active cross-over filter (24 dB/oct Linkwitz-Riley, 1000 Hz).

      • 2 x 12” woofers, 3” voice coil, with lightweight neodymium magnet assemblies.

      • 2” neodymium compression driver – with titanium diaphragm and
      a 3” voice coil.

      • 60° x 40° constant directivity horn.

      • Trapezoidal cabinet, reinforced with internal steel braces, made from high grade phenyl-glued multiply birch and finished with highly resistant antiscratch polyurethane black paint.

      • W24As may be flown using industry standard flying hardware.
      It embodies on both sides slide guides for standard anchor rings to allow the loudspeaker suspension. On its rear side there are two recessed rings for tilt adjustment of the suspended speaker.

      • Stand adapter; ergonomically designed side handles for easy transportation and set-up.

       

      Applications

      • Suitable for the most demanding professional requirements in the most diverse situations, for both indoor and outdoor use.

      • Stadiums, arenas

      • Concert halls

      • Medium-to-large theatres

      • Medium-to-large night clubs

      • Large-scale events

      specifications

      Enclosure

      2 way bass-reflex

      Frequency response

      50Hz ÷ 20kHz

      Sensitivity (1W,1m)

      103 dB

      Max SPL

      134 dB

      Components (custom)

      2 x 12″ neodymium magnet high efficiency woofers
      2″ neodymium dynamic driver coupled to a constant directivity horn (60°H x 40°V)

      Electronic crossover

      1000 Hz, 24dB/Oct (Linkwitz-Riley)

      Construction

      High grade phenyl-glued multiply birch
      Internal steel braces
      Slide guides for standard anchor ring
      Recessed rings for the inclination adjustment
      Powder painted steel protection grille
      Side handles
      Stand adapter

      Amplifier

      2 MosFet, class AB, amps controlled by
      2 independent active dynamic processors
      Forced cooling (low turbolence fan)

      Max. output power

      800 + 250 W
      Bass: 800 W (4 ohms/0,1% THD)
      Mid/High: 250 W (8 ohms/0,1% THD)

      Connections

      Balanced XLR input and output (link) wired in parallel
      Mains power connector Neutrik PowerCon®

      Dimensions (WxHxD)

      41.4 x 94.3 x 36.8 cm

      Weight

      42.5 kg

       

      Vekt 46 kg
      Innebygget mikrofon

      Nei

      Produsent

      Montarbo

      Vibrarm

      Nei

      Omtaler

      Det er ingen omtaler ennå.

    Handlekurv