Montarbo W24As

kr 38 550,- (ink. mva)

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: F000374 Kategori:

    Montarbo W24As

    Designet for å gi et utsøkt lydbilde i alle situsjoner. W24A er idèell i applikasjoner der det kreves høye lydtrykk, maksimum definisjon og klar lyd. Musikere og utleiefirmaer er garantert en behagelig hverdag. De innebygde forsterkerne og prosessorene, er optimert for å gi et ekstremt lydtrykk samtidig som den rene lyden blir bevart uten forvrengning.

     

     

    Designed to provide outstanding sound performance in the most diverse situations, W24As is ideally suited to applications requiring high sound pressure levels, maximum definition and clean sound. Musicians and rental companies alike are going to be satisfied with this product.
    The built-in amplifiers and control electronics are optimized for the transducers enabling the system to produce power with a flat response and extremely low distortion.

    • Typical features of much bulkier, heavier systems: high sound pressure levels, response extended to the extremes of the range,
    very low distortion, cleanness of the medium range, high dynamics.

    • 134 dB max SPL.

    • 2 class AB MosFet power amplifiers deliver a total output power of 1050 W (LF 800 W, HF 250 W).

    •  2 indipendent dedicated dynamic processors

    • Active cross-over filter (24 dB/oct Linkwitz-Riley, 1000 Hz).

    • 2 x 12” woofers, 3” voice coil, with lightweight neodymium magnet assemblies.

    • 2” neodymium compression driver – with titanium diaphragm and
    a 3” voice coil.

    • 60° x 40° constant directivity horn.

    • Trapezoidal cabinet, reinforced with internal steel braces, made from high grade phenyl-glued multiply birch and finished with highly resistant antiscratch polyurethane black paint.

    • W24As may be flown using industry standard flying hardware.
    It embodies on both sides slide guides for standard anchor rings to allow the loudspeaker suspension. On its rear side there are two recessed rings for tilt adjustment of the suspended speaker.

    • Stand adapter; ergonomically designed side handles for easy transportation and set-up.

     

    Applications

    • Suitable for the most demanding professional requirements in the most diverse situations, for both indoor and outdoor use.

    • Stadiums, arenas

    • Concert halls

    • Medium-to-large theatres

    • Medium-to-large night clubs

    • Large-scale events

    2-Way Active Bi-amplified Speaker

    features

    Designed to provide outstanding sound performance in the most diverse situations, W24As is ideally suited to applications requiring high sound pressure levels, maximum definition and clean sound. Musicians and rental companies alike are going to be satisfied with this product.
    The built-in amplifiers and control electronics are optimized for the transducers enabling the system to produce power with a flat response and extremely low distortion.

    • Typical features of much bulkier, heavier systems: high sound pressure levels, response extended to the extremes of the range,
    very low distortion, cleanness of the medium range, high dynamics.

    • 134 dB max SPL.

    • 2 class AB MosFet power amplifiers deliver a total output power of 1050 W (LF 800 W, HF 250 W).

    •  2 indipendent dedicated dynamic processors

    • Active cross-over filter (24 dB/oct Linkwitz-Riley, 1000 Hz).

    • 2 x 12” woofers, 3” voice coil, with lightweight neodymium magnet assemblies.

    • 2” neodymium compression driver – with titanium diaphragm and
    a 3” voice coil.

    • 60° x 40° constant directivity horn.

    • Trapezoidal cabinet, reinforced with internal steel braces, made from high grade phenyl-glued multiply birch and finished with highly resistant antiscratch polyurethane black paint.

    • W24As may be flown using industry standard flying hardware.
    It embodies on both sides slide guides for standard anchor rings to allow the loudspeaker suspension. On its rear side there are two recessed rings for tilt adjustment of the suspended speaker.

    • Stand adapter; ergonomically designed side handles for easy transportation and set-up.

     

    Applications

    • Suitable for the most demanding professional requirements in the most diverse situations, for both indoor and outdoor use.

    • Stadiums, arenas

    • Concert halls

    • Medium-to-large theatres

    • Medium-to-large night clubs

    • Large-scale events

    specifications

    Enclosure

    2 way bass-reflex

    Frequency response

    50Hz ÷ 20kHz

    Sensitivity (1W,1m)

    103 dB

    Max SPL

    134 dB

    Components (custom)

    2 x 12″ neodymium magnet high efficiency woofers
    2″ neodymium dynamic driver coupled to a constant directivity horn (60°H x 40°V)

    Electronic crossover

    1000 Hz, 24dB/Oct (Linkwitz-Riley)

    Construction

    High grade phenyl-glued multiply birch
    Internal steel braces
    Slide guides for standard anchor ring
    Recessed rings for the inclination adjustment
    Powder painted steel protection grille
    Side handles
    Stand adapter

    Amplifier

    2 MosFet, class AB, amps controlled by
    2 independent active dynamic processors
    Forced cooling (low turbolence fan)

    Max. output power

    800 + 250 W
    Bass: 800 W (4 ohms/0,1% THD)
    Mid/High: 250 W (8 ohms/0,1% THD)

    Connections

    Balanced XLR input and output (link) wired in parallel
    Mains power connector Neutrik PowerCon®

    Dimensions (WxHxD)

    41.4 x 94.3 x 36.8 cm

    Weight

    42.5 kg

     

    Vekt 46 kg
    Innebygget mikrofon

    Nei

    Produsent

    Montarbo

    Vibrarm

    Nei

    Omtaler

    Det er ingen omtaler ennå.

Handlekurv