Montarbo FULL1018

FULL1018 er et ekstremt «high-end» lydsystem. Perfekt til deg som ikke ønsker noe kompromiss når det kommer til lydkvalitet. Systemet er et 3-veis aktivt tri-ampet system beståenda av FULL18 aktiv subwoofer med innebygget forsterker til satelitten FULL10. Dette er et plug-and-play system med eksepsjonelle egenskaper størrelse og kraft tatt i betrakning. Størrelse gjør den enkel å transportere/montere. Det som skiller FULL1018 fra et tilsvarende system er ingeniørenes valg av elementer, som du som regel kun finner i større systemer.

 

Den geometriske formen av kabinettene og plasseringen av bassrefleksene er nøye designet og plassert for å unngå turbulens og lydkomprimering.

 

Kabinettet til FULL18 subwooferen er utrustet med klasse D switchmode forsterkere, kontrollert av Montarbos DSP management system(56bit, 180Mhz, 24 bit convertere). DSPen kontrollerer filtrering, equaliser, delay, limiter og diagnose funksjoner. DSPen styrer også strømforbruket når man ikke har signal inn går forsterkerne i «standby mode», og setter ned strømforbruket til et minimum.

 

Det ligger 5 presets ferdige i prosessoren som kan betjenes fra subwooferen, og du har mulighet til å lagre et selv etter eget ønske og smak. Dette gjøres med Montarbos software RAConLSTM og via interface LD-2.4(valgritt tilleggsprodukt). Ved fjernstyringen kan man justere frekvensresponsen med en 10 bånds fullparametrisk equalizer, justere delay, outputen på hvert kabinett og følge diagnostikken til forsterkeren.

 

Info:

• FULL 1018 is a 3-way active tri-amplified speaker system, composed of one passive satellite and an active bass cabinet.

• 3 class D power amplifiers (with switching-mode power supplies) can supply a total power of 2500 Watts EIAJ (1000 W to the bass cabinet, 1500 W to the satellite speaker system).

• 133 dB max SPL.

• FULL 18 bass cabinet: 18” woofer (4” voce coil) with a ventilated, shielded neodymium magnet.

• FULL 10 satellite: 10” woofer (3” voice coil) with a ventilated, shielded neodymium magnet; HF driver, with 1” throat and 2.5 “  voice coil, featuring a neodymium magnet and titanium diaphragm; wide dispersion (80° H x 60° V) wave-guide horn.

• Montarbo 56 bit DSP, 180 MHz, 24 bit converters.

• Dedicated standby function.

• 5 presets one of which may be customized and loaded into the DSP.

• Presets remote control and customization by means of the proprietary software program RAConLSTM and the optional LD2.4 USB interface.

• With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.

• Birch plywood cabinet, finished with anti-abrasion paint.

• 8 threaded studs (M10) for safe and simple suspension of the satellite;
adapter for the SM5 coupling bar (supplied with the system);
transport handles.

 

Applications

• Large clubs.

• DJ sets.

• Any kind of live or recorded music reproduction.

• Fills large open-space venues with maximum accuracy.

• Stage monitor at large events (in-fill, monitor for the
rhythm section, etc.).

• Recording studios, control rooms.

 

 

specifications

Enclosures	FULL 10: 2-way vented bass-reflex FULL 18: vented bass-reflex
Components	custom designed on Montarbo specifications
FULL 10 (passive sat.)	1 x 10” woofer (3” voice coil) with shielded ventilated neodymium magnet 1 x compression driver (1” throat, 2.5” voice coil), with neodymium magnet and titanium diaphragm fitted to a high directivity (80° H x 60° V) wave guide horn
FULL 18 (bass unit)	1 x 18” woofer (4” voice coil) with shielded ventilated neodymium magnet
Frequency response	37 – 20.000 Hz (of complete system)
max SPL (peak)	FULL10: 133 dB FULL18: 133 dB half-space
Electronic cross-over	100 Hz / 1400 Hz
Amplifier	3 class D power units contained  in the FULL18 cabinet
LF output power	1 x 1000 W
HF output power	1 x 500 W
MHF output power	1 x 1000 W
Total output power	2500 W  EIAJ
DSP	Montarbo – contained in the FULL18 cabinet
Processing	56 bit / 180 MHz
Conversion	24 bit
Managements functions	Filtering, equalizer, delay, limiting diagnostic (amplifier power control, amplifier temperature control external temperature control) 5 presets, 1 of which is custom-programmable Remote control by PC (of up to 10 systems)
Connections and controls	FULL 18 4-pole Speakon® connector for the connection to the FULL10 satellite Signal input and link balanced XLR connectors Volume control Status Led indicators (signal, clipping, thermal warning protection) Active preset LED indicator RJ45 DATA connectors for the two RS485FD serial interfaces for the connection to a PC (Montarbo net) PowerCon® connectors for mains power supply (input + link) FULL 10 satellite 4-pole Speakon® for the connection to the FULL18 subwoofer
Construction	Birch plywood, high-impact, chip-resistant paint, steel protection grill with external foam protection
Fittings	Carrying  handles M10 threaded inserts (on FULL10 satellite cabinet) Stand adapter for coupling the two system’s cabinets
Dimensions / Weight	FULL18 W 512 x H 522 x D 550 mm / 34.8 kg FULL10 satellite W 302 x H 516 x D 256 mm / 14.4 kg