Montarbo CA MATRIX 5475

MATRIX 5475

The FiveO MATRIX 5475 multi-area amplified mixer features 5 input channels that can be assigned to 4 outputs; each input channel is equipped with gain control and tone control with bass and treble, a LED mute control and a volume control, and 4 selectors that allow to assign each input to the 4 outputs.

The first 3 channels can be used to receive both microphone signals, with or without phantom power, and line-level signals through XLR connectors; the fourth and fifth stereo input channels only accept line-level signal through RCA connectors. An Aux-paging input allows to connect an auxiliary signal with “Voice Priority” function which inhibits all other input signals once an auxiliary message has been sent. There is also a contact terminal which, when circuitized, attenuates the signals coming from channels 4 and 5. The four outputs are available on terminal connectors both as line-level signals and amplified signals selectable at 25-70-100V constant voltage, or at 4 and 8 ohms impedance. The maximum power available on each output is 90W. The outputs are controlled by 4 master level potentiometers on the front panel.

There is also a monitor function that allows the listening of the 4 areas on a service speaker through a dedicated output. All outputs are equipped with a VU-meter that allows the view of each area level. The unit features also a headphone output with independent volume control. The selectable 110V or 220V AC power and the possibility to power the device even at 24V DC, make the FiveO MATRIX 5475 suitable for use in any situation.