The BM 30W is a microphone designed to be used on a surface or hung on a wall.
The red LED on the front grille indicates the status of the microphone.
The ON / OFF control button can be programmed using the switches at the back of the microphone.
It can work as a PTT (push to talk) or PTL (push to lock) in both normally open and normally closed mode.
The red LED will always indicate only the open microphone status; there is also a selector to set, if desired, a high-pass filter.
3 m white cable from mini XLR female (on microphone) to male XLR supplied.
Capacitor capsule that requires Phantom + 48V power supply.
The lower part is finished with an anti-slip knurled rubber for an optimal grip on the support surface.
Montarbo CA BM 30W
kr 2 095,- (ink. mva)
Bestillingsvare
FRAKTPRISER FRA 99,-
(Gjelder ikke varer over 35 kg)
Ikke på lager, kontakt oss for bestilling og leveringstid.
- Beskrivelse
- Spesifikasjoner
- Tilleggsinformasjon
- Omtaler (0)
Technical specifications
Cardioid condenser surface microphone
Complete with programmable switch / button
Status LED
High-pass filter
Frequency response: 30-20000 Hz
Sensitivity: -55 dB
Impedance: 100 ohms
Maximum Pressure: 130 dB SPL 1 kHz to 1% THD
Dynamic: 101 dB
Signal to noise ratio: 65 dB
Power supply: 11-52 Vdc 2mA typical
Connector: mini XLR male
Equipped with 3 m white cable
Dimensions 104 mm (L) x 102 mm (W) x 21 mm (H)
Color: White
Vekt | 1 kg |
---|---|
Produsent | Montarbo Commercial Audio |
Omtaler
Det er ingen omtaler ennå.