JBL Control 29AV | 8″ og horn, 8ohm/70V/100V, sort

kr 11 135,- (ink. mva)

JBL Control 29AV | 8″ og horn, 8ohm/70V/100V, sort

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: 801-00120 Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      The rotatable high-frequency horn allows use of the speaker in either vertical or horizontal orientation. Consistent coverage ensures excellent sound character throughout the listening area. Moderate magnetic shielding allows use of the speaker as close as 230 mm (9) to video monitors. The top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows use of either 70V or 100V distributed speaker lines. In bypass position, the 8Ω impedance allows use of multiple speakers on a loudspeaker line.

      Features

      • Extended bandwidth, extremely smooth frequency response.
      • 110° x 85° HF coverage, rotatable horn.
      • 110 W transformer for 70 V or 100 V lines, with 8 ohm thru.
      • SonicGuard™ overload protection.
      • 200 mm (8 in) Kevlar cone woofer,
        25 mm (1 in) titanium diaphragm compression driver.
      • Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and
        optional U-bracket.
      • Sealed input panel cover and screwdown input terminals.
      Frequency Range 37 Hz –18 kHz (-10 dB)
      Power Capacity 300 W Continuous Program Power , 150 W Continuous Pink Noise
      Transformer Taps 70 V: 110 W, 55 W, 28 W & , 14 W 100 V: 110 W, 55 W, & , 28 W, Thru Position: 8 ohms nominal
      Frequency Response 45 Hz – 18 kHz ( ± 3 dB)
      Maximum SPL @ 1m Short-Term: 120 dB , Long-Term: 114 dB
      Nominal Sensitivity 90 dB (2.83V / 1m)
      Nominal Coverage Angle 110° H x 85° V, rotatable
      Directivity Factor (Q) 7.2 dB, averaged 500 Hz to 16 kHz
      Directivity Index (DI) 8.6 dB, averaged 500 Hz to 16 kHz
      Nominal Impedance 8 ohms
      Minimum Impedance 6.3 ohms @ 230 Hz
      Crossover Network 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
      Low Frequency 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
      High Frequency 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
      Enclosure Material High impact polystyrene
      Grille Thermoset composite coated steel, WeatherMax multi-layer foam
      Overload Protection Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
      Environmental IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & , UV. Passes Mil-Std-202F for salt spray.
      Terminations Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
      Safety Agency Rating Transformer is listed per UL1876
      Colors Black or white (-WH)
      Dimensions (H x W x D) 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
      Net Weight (ea) 12.2 kg (26.8 lb.)
      Shipping Weight (ea) 14.0 kg (30.8 lb.)
      Included Accessories 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
      Optional Accessories MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket
      Vekt 14 kg
      Produsent

      JBL

    Handlekurv