JBL Control 25AV | høyttaler, magn skjermet 8 ohm, 70/100V

kr 4 835,- (ink. mva)

JBL Control 25AV | høyttaler, magn skjermet 8 ohm, 70/100V

Bestillingsvare

Legg til ønskelisteFjern fra ønskeliste
Legg til ønskeliste

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: 801-00118 Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      The top-quality transformer, with reduced saturation, allows use on either 70 volt or 100 volt distributed speaker lines, with similar performance fidelity. In the bypass position, the high 8Ω impedance allows use of more speakers on a loudspeaker line. The unique, global patent pending InvisiBall® mounting method is simple to install, aims easily, and provides a high degree of theft deterrence. The cabinet accepts a variety of paints to match any décor.


      Features

      • Video shielded for use near video monitors.
      • Extremely smooth frequency response.
      • Stainless steel grill for harsh environments.
      • 60 W transformer for 70 V or 100 V lines, with 8 ohms thru.
      • SonicGuard™ overload protection.
      • 130 mm (5.25 in) polypropylene coated woofer, 10 mm (.75 in) titanium coated horn-loaded tweeter.
      • Includes InvisiBall® mounting hardware and sealed input panel cover.
      • Screw-down input terminals.
      • 100° x 100° high frequency horn.
      Frequency Range 70 Hz - 23 kHz (-10 dB)
      Power Capacity 200 W Continuous Program Power , 100 W Continuous Pink Noise
      Transformer Taps 70V: 60 W, 30 W, 15 W, 7.5 W 100V: 60 W, 30 W, 15 W
      Nominal Sensitivity 87 dB SPL, 1 W @ 1 m (3.3 ft)
      Midrange (±1.5 dB, typical) 130 Hz - 14 kHz
      Nominal Coverage 100° x 100°
      Maximum SPL @ 1m 113 dB continuous peak pink noise 107 dB continuous average pink noise 103 dB continuous average music or speech
      Directivity Factor (Q) 4.9 dB, averaged 500 Hz to 4 kHz
      Directivity Index (DI) 6.9 dB, averaged 500 Hz to 4 kHz
      Nominal Impedance 8 ohms
      Minimum Impedance 6.7 ohms at 230 Hz
      Crossover Network Second Order Low Pass, Second Order High Pass, Complex Optimization for Maximally Flat Response
      Low Frequency 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
      High-Frequency 20 mm (.75 in) titanium coated PEI
      Enclosure Material High Impact polystyrene
      Grille Painted stainless steel, black or white to match cabinet, paintable
      Overload Protection Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition
      Environmental Exceeds Mil Spec 810 for humidity, salt spray, temperature & , UV. IEC 529 IP-X4 splashproof rating
      Terminations Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)
      Safety Agency Rating Transformer is listed per UL1876
      Colors Black or white (-WH)
      Rotation Against wall on InvisiBall Base: 37° vertical 44° horizontal On bracket: 44° all directions
      Dimensions (H x W x D) 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
      Net Weight (ea) 4.0 kg (9 lb)
      Shipping Weight (ea) 9.0 kg (20 lb) per pair
      Included Accessories 1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench
      Optional Accessories MTC-25V: For vertical columnar orientation of up to 3 loudspeakers extension of the woofer surround that MTC-25/23H: For horizontal splaying of two speakers. Three brackets array up to six loudspeakers in a 360° array. MTC-28/25CM: Ceiling-mount adapter.
      Vekt 5 kg
      Produsent

      JBL

    Relaterte produkter

    Handlekurv