JBL CBT50LA-1 | passiv kolonnehøyttaler med 8 stk 2″ elementer, hvit

kr 12 710,- (ink. mva)

JBL CBT50LA-1 | passiv kolonnehøyttaler med 8 stk 2″ elementer, hvit

Bestillingsvare

Legg til ønskelisteFjern fra ønskeliste
Legg til ønskeliste

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: 801-01001 Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      The CBT 50LA-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control, utilizing analog delay beam-forming and amplitude tapering to accomplish consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor passive column speakers.

      Features

      • Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
      • Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
      • Dynamic SonicGuard™ overload protection
      • Built-in 70V/100V transformer, plus 8 ohm direct capability.
      • Swivel (pan) / tilt wall bracket included.
      Components Eight 50 mm (2 in) Full-Range
      Frequency Range (-10 dB) 80 Hz – 20 kHz
      Coverage Pattern Vertical 20° (1.5 kHz - 16 kHz, ±10°) Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)
      Sensitivity (2.83V@ 1m) 93 dB (speech mode, 2 kHz - 14 kHz) 89 dB (music mode, 300 Hz - 18 kHz)
      Nominal Impedance 8 ohms
      Power Capacity (8 ohm setting) 150W (600W peak), 2 hrs 100 W (400W peak), 100 hrs
      Max SPL Speech mode: 115 dB cont ave (121 peak) Music mode: 111 dB cont ave (117 peak)
      70V/100V Transformer Taps 60W, 30W, 15W, (7.5W at 70V only), and 8? thru, via switch
      Enclosure Fiberglass reinforced ABS cabinet, painted aluminum grille
      Outdoor Capability IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.
      Colors Black or White (-WH)
      Insert Points Ten M6 insert points on back panel.
      Mounting Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
      Dimensions (H x W x D) 528 x 99 x 153 mm (20.8 x 3.9 x 6.0 in)
      Net Weight 4.1 kg (9.0 lb)
      Included Accessories Swivel (pan) / tilt wall bracket
      Optional Accessories MTC-PC2 terminal panel cover MTC-CBT-FM1 flush-mount low-profile wall-mount bracket MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand
      Vekt 8 kg
      Produsent

      JBL

    Relaterte produkter

    Handlekurv