JBL AWC15LF | 15″ bass, 500W, sort

kr 26 885,- (ink. mva)

The AWC15LF is a compact highly weather resistant loudspeaker for augmenting the low frequency capability of a sound system. AWC15LF is ideal for many applications

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: 801-02607 Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      The AWC15LF utilizes a high-power, long-excursion 380 mm (15 in) low frequency driver with Kevlar-reinforced cone for reliability, well-damped surround for smoother frequency response, high temperature 75 mm (3 in) voice coil and a reduced distortion design through saturatedgap magnet geometry.

      Features

      • Low frequency reinforcement for outdoor applications
      • Highly weather-resistant IP56 rating
      • Component:
        • 380 mm (15 in) woofer with Kevlarreinforced cone and 75 mm (3 in) voice coil.
      • 500 Watt power handling (average continuous pink noise)
      • Frequency range down to 45 Hz
      • 300 Watt 70V/100V multi-tap transformer or direct 8Ω low-impedance.
      Frequency Range (-10 dB) 45 Hz – 2.2 kHz
      Frequency Response (±3 dB) 70 Hz – 1.2 kHz
      Long-Term System Power Rating (IEC) 500 W (2000 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs.
      Sensitivity (2.83V @ 1m) 94 dB (Ave. 80 Hz – 300 Hz)
      Maximum SPL Direct 8?: 121 dB (peaks of 127 dB) 300 W Tap: 119 dB (peaks of 125 dB)
      Nominal Impedance 8 ohms (in Direct mode)
      Transformer Taps 70V: 300W, 150W, 75W, 38W 100V: 300W, 150W, 75W
      Low Frequency Driver 380 mm (15 in), Kevlar-reinforced cone, with weather treatment, 75 mm (3 in) voice coil, long throw.
      Enclosure ABS with Glass enclosure, heavily braced
      Attachment Two M10 (course-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
      Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
      Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside openlug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
      Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & , UV, and ASTM G85 for salt spray (168 hrs).
      Dimensions 486 x 486 x 479 mm (19.1 x 19.1 x 18.8), cabinet 507 mm (19.9 in) depth with gland nut 546 mm (21.5 in) including bracket extending to back
      Included Accessories U-bracket, matches loudspeaker color (gray or black), zinc-rich extra-thick powder coated, steel.
      Vekt 27 kg
      Produsent

      JBL

    Handlekurv