A true double feature, the Hammertone Boost pushes your signal to new levels with two distinct flavors of boost in one enclosure. Use the Type switch to select between a pristine, clean opamp boost circuit designed for colorless volume boosting and a JFET based boost that fattens your signal with a taste of harmonically rich compression characteristic of preamps in vintage tape units. Easily attain a completely flat boost thanks to the center detents on the Treble and Bass controls or adjust each knob to your liking – boosting and cutting frequencies as you see fit. This all-in-one boost pedal is capable of solo boosting with no added coloration, pushing your amp into breakup, sweetening your core tone, and so much more.
TWO BOOST CIRCUITS IN ONE
Two unique boost circuits offer different flavors of boost for any application. Use the JFET boost circuit to inject flavor and grit into your tone or use the opamp boost circuit for clean, uncolored volume boost.
ACTIVE 2-BAND EQ
Active Treble and Bass controls provide a wide range of tonal shaping. Dial in treble boost, bass boost, and everything in between.
20dB OF BOOST
A whopping 20dB of available boost kicks up your signal with plenty of power on tap to push a tube amp into overdrive or cut through the mix for a solo.
TOP MOUNTED JACKS
Top-mounted input, output and power jacks allow more pedals to be used on the same board, as well as increasing pedal routing options.
SOFT-TOUCH RELAY BYPASSING
Relay true bypass switching ensures that when the pedal is off, your signal is clean and clear.
POWER WITH 18V FOR MORE HEADROOM
Designed to operate with 9V-18V power supplies. Plug in an 18V power supply to experience an additional 6dB of headroom.
- Powered by 9-Volt Battery or Center Negative AC Adaptor, Not Included
