Kondensatormikrofon med mange bruksområder inne både tale og musikk. Spesielt egnet for opptak og lydforsterkning av lavfrekvente instrumenter som perkusjon, basstromme og piano.
PZM 30D has a switchable dual frequency response: Rsing (R) or fl at (F). The “rising”position adds brilliance. This makes it usefulwherever a crisp attack is desired, such as on percussion, drums, or piano. The user canget a bright sound without boosting high frequencieson the recording console; the resultis lower noise. The “fl at” position provides asmooth, fl at, high-frequency response for natural sound reproduction.
Type: Pressure Zone Microphone
Transducer: Electret condenser
Frequency response: 20 Hz to 20 kHz
Polar pattern: Hemispherical when used on a floor, wall or ceiling
Open circuit sensitivity: 7 mV/Pa* (–43 dB re 1 volt/Pa)
Power sensitivity: –43 dB re 1 mW/Pa. EIA sensitivity –135 dBm
Impedance: 240 ohms, balanced. Recommended minimum load impedance 1000 ohms
Self-noise: 20 dB equivalent sound pressure level, A-weighted
S/N ratio: 74 dB at 94 dB SPL
Maximum Sound Pressure Level: 150 dB SPL at the microphone produces 3% THD
Polarity: Positive pressure on the diaphragm produces positive voltage on pin 2 with respect to pin 3 of the output connector
Operating voltage: Phantom power, 12 to 48 volts
DC, positive voltage on pins 2 and 3 with respect to pin 1 of the output connector
Current drain: 1.1 mA
Connector: Male 3-pin XLR-type
Cable: None supplied; use 2-conductor shielded microphone cable
Switch: Frequency-response select switch for rising or flat response
Color: Black
Weight: 184 grams
Dimensions: 15.2 cm x 12.7 cm x 1.9 cm
Included accessories: PZM windscreen, carrying pouch
Optional accessories: PH-1A phantom power supply (1 channel, battery or AC-adapter powered)
Omtaler
Det er ingen omtaler ennå.