CAD Audio M179

kr 3 995,- (ink. mva)

The CAD M179 combines a vintage capsule design with advanced electronics. The M179 features the dual pattern version of the original equitek e-300 capsule, an externally biased capsule with a gold sputtered 1.1″ diaphragm.

På lager

Legg til ønskelisteFjern fra ønskeliste
Legg til ønskeliste

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: M179-CAD Kategori:

    Travel the space-tone continuum with the touch of a dial. The figure-of-eight is rich and intimate. The omni is spacious and articulate. Experience all the variations in between. We combine the large-diaphragm capsule with algebraic phasing and high-power transformerless drive to create an indispensable acoustical window. Additional features include hi-pass filter and attenuator. Swivel mount, elastic shock mount and carrying case are included. P24 (24V) or P48 (48V) phantom power is required.

    The CAD M179 incorporates a number of unique features
    including:
    • Continuously variable pattern with a «hard» cardioid center detent.
    • Large 1.1″ dual diaphragm external bias condenser capsule.
    • Gold sputtered diaphragms.
    • High SPL capability (143 dB SPL with pad)
    • Transformerless balanced output circuits.
    • 20 dB non-capacitive pad
    • 6dB/Octave @ 100Hz high-pass filter
    • Stainless steel internal pop/EMI filter.

    Type: Side address, external bias condenser Frequency Response: 10-20 kHz Polar Pattern: Variable Impedance: 200 ohms Sensitivity: -36 dBV (16mV) @ 1Pa Equivalent Noise Level: 11 dB-A Maximum SPL: 143 dB SPL (with pad) Total Harmonic Distortion: Less than 0.15% Switches High-pass filter, 20dB pad High-Pass Filter 100Hz, 6dB/octave Powering: Minimum requirements are 24-52V phantom power capable of delivering at least 8 mA. Connector: Three pin male XLR type. Finish: Durable charcoal gray urethane. Satin nickle plated front & rear screen. Dimensions: 2.25” (57.2 mm) Dia., x 7.00” (177.8 mm) High Net Weight: 17.8 oz. (506 grams) Furnished Accessories: MZM-5 elastic suspension shockmount
    Vekt 3 kg
    Produsent

    CAD Audio

    Omtaler

    Det er ingen omtaler ennå.

Relaterte produkter

Handlekurv