C.MARTIN DC FACTORY

CARL MARTIN DC FACTORY

Brukermanual
</img src>

2500mA 100% Isolated and separated PSU. Whether you are an international touring musician, or a weekend warrior, you should be very concerned with the power you are supplying to your pedals…..and because you are, the Carl Martin «DC Factory» Power Supply was designed just for you! With the constant addition of very ‘power hungry’ digital pedals on the market, we designed the DC Factory to address that very need. Highly powered and totally noise free, the DC Factory doesn’t take up too much real estate on your pedalboard and literally weighs about 2/3 of a kilogram (1.5 lbs). To meet these goals, we had to forget about the standard toroidal transformers and design a fully digital switch mode power supply! The benefits go beyond ample power, the size and weight are reduced and most importantly, there is no radiation of hum to Wah pedals or certain analog drive pedals. Power supply set up The DC Factory can power up to 5 digital pedals when you plug one of each into the
five separated and isolated digital power supplies, and also 5 analogue effects when
you plug them into the second jack in each of the 5 power supplies, as long as the
power demand for the two pedals in each PSU does not exceed 500mA.

Technical Specifications Mains Power Input; SwitchMode fused 100-240V (fuse T1A). 4 x 500mA 9V Digital Isolated separated PSU’s each with 2 DC output (Barrel positive +) 1 x 500mA 12V Digital Isolated separated PSU with 2 DC output (Barrel positive +) Total DC outputs: 10 pcs (Barrel positive +) Total Power available: 2500mA Weight: 0.68 Kg Size: 150x85x45mm