A&H Xone DB4 Digital DJ FX Mixer

kr 24 385,- (ink. mva)

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: xone-db4-BEN Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      Digital DJ FX Mixer

      High-end digital DJ-mikser fra Allen & Heath.

      The Xone:DB4 is a truly ground-breaking mixer and by far the most advanced product that we have designed. Every feature has been meticulously researched with a view to offering DJs ultimate creativity.

      Based on the iLive pro-touring FX system, we developed FX algorithms with BPM conscious parameters and tight spectral control, customised to perfectly fit the DJ environment. As the loops and FX are automatically synchronised to the tempo of the track, it is very easy to build some amazing grooves and soundscapes without problems of latency, low fidelity and the general hassle often associated with using software and laptops.

      The icing on the cake is the flexible input matrix, where any audio source can be selected on any or all of the channels. Different processing can be applied to the same track on separate channels and you can fade between them, or a phrase sampled in the looper of one channel can be added to the mix later in the track. Our digital design team has done an incredible job to ensure that this is one of the most innovative and exciting DJ mix tools to date.

       

      Quad FX Core

      The heart of the Xone:DB4 is the powerful Quad FX Core DSP engine, enabling each channel to have its own FX bank and BPM detection system, which automatically adjusts all time-related FX and loops to the tempo of the music. There are 5 studio quality FX types optimised for DJ use – delays, reverbs, modulators, resonators and damage – plus each FX type has a patch library of different effect variations. Each FX bank has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers in the FX master section. 

       

      Looper

      Each channel has a built-in looper, with selectable loop length from 1/16 beat to 4 bars. :DB4 will always record the full 4 bars, so the loop can be expanded or shrunk at will. 

       

      Filters

      :DB4 comes equipped with the Xone dual filter system. 

       

      Source select

      Each music channel can select any of the available stereo music sources: Analogue Line 1-4 (switchable to Phono on 2-3), Digital 1-4 or USB 1-4. 

       

      EQ / Filter

      Each music channel has a 3-band EQ that can be configured as standard asymmetric EQ (+6/-25dB), Isolator (+6dB/OFF with a 24dB/octave slope), or reconfigured as a High-Pass/Low-Pass filter system with adjustable resonance. EQ knob pointers change colour to show which type of equalization is active. 

       

      Mic/Line Input

      The Mic/Line input has 2-band EQ, gain, cue and mix level. This can also be routed to channel 1 for adding FX. 

       

      Integral Soundcard

      A built-in, high quality (24-bit / 96kHz), multi-channel, fully patchable USB2 soundcard allows replay and recording from audio software for 4 stereo sends and 4 stereo returns. 

       

      USB

      User-defined settings such as meter mode, BPM range, USB audio routing scheme and display brightness can be saved to a USB key for recall on another :DB4. 

       

      MIDI control

      All controls (except Mic and Phones level) send MIDI data and the mixer can double up as a MIDI controller via the MIDI shift button, allowing the Loop and FX selection controls to send MIDI data without changing the mixer settings. 

       

      Output Patchbay

      Booth, record and phones – source selectable and level trim. Booth and main – phase and level trim controls. 

       

      High Visibility Display

      The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions. 

       

      Lightweight chassis

      :DB4’s lightweight aluminium chassis is designed to make touring with the console easy.

      • 4 channels

      • 10 Inputs (including 2 mic)

      • 24-bit/96kHz USB Audio interface

      • 3 band switchable EQ with LED indicators:

      • +6dB/OFF with a 24dB/octave slope or High-Pass/Low-Pass filter system

      • Gain controls

      • XLR Mic/Line input with 2-band EQ

      • RCA Aux Line input

      • Fully assignable crossfader

      • Contour controls for crossfader and input channels

      • 2 x Assignable X:ONE Filters

      • 13-segment LED monitoring

      • Independent Quad Core FX control on each channel

      • Independent BPM Detection and display on each channel

      • Flexible Matrix input assign

      • USB 2.0 connection

      • X-Link output connection

      • 4 x Digital inputs, Digital record output

      • Balanced xlr master output

      • Balanced 6.3mm (1/4") jack booth output

      • RCA phono record output

      • Black finish

      • Weight : 9kg

      • Height : 25cm x Width : 28cm x Depth : 53cm

      • Power : 240V / 110V switchable

      Produsent

      Allen

      Omtaler

      Det er ingen omtaler ennå.

    Handlekurv