Neumann KMR 81I Shotgun Mikrofon

kr 21 800,- (ink. mva)

Short shotgun microphone for film dialogue and ENG

Bestillingsvare

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: 006961-SEN Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      Directional microphone, supercardioid/directional, 48 V phantom power, XLR-3 M, nickel, includes WS 81

      • -Shotgun microphone for medium distances
      • -Lobe shaped pattern with 90° pickup angle
      • -High directivity without off-axis coloration

      PRISTINE DIALOGUE, UNCOLORED SOUND

      The KMR 81 i is a shotgun microphone for medium distances, e.g. for film dialogue with a clear and focused sound while the microphone is placed outside the picture. Off-axis coloration is minimized to avoid sound change when actors are moving. The KMR 81 i offers high sensitivity with low power consumption and is lightweight for easy handling.

      A PROBLEM SOLVER WITH A TOUCH OF CLASS

      The KMR 81 i is a shotgun microphone with a high directivity for situations that require the microphone to be kept at a distance from the source. This is often the case in electronic news gathering (ENG) and film dialogue recording, where the microphone must remain invisible. The KMR 81 i can also be used to obtain a clear and focused sound in noisy environments.

      Technically speaking, the KMR 81 i combines a pressure gradient condenser capsule with a medium-length interference tube to achieve a narrow acceptance angle of 90˚ and excellent rejection of unwanted sound. Unlike many other shotgun microphones, the Neumann KMR 81 i’s lobe shaped pickup pattern is frequency-independent. In other words, off-axis sound is picked up at reduced level but without unwanted coloration. This makes it easy to correct a misaligned microphone in postproduction.

      Compared to other shotgun microphones, the Neumann KMR 81 i offers a more natural sound image. Its frequency response is highly linear up to 2 kHz while a broad treble lift compensates for high frequency losses that occur when recording at greater distances. The KMR 81 i offers very low self-noise of only 12 dB-A and a high sensitivity of 18 mV/Pa, which can be reduced by 10 dB to protect the microphone input from overload. The KMR 81 i can handle high SPLs of up to 128 dB without audible distortion (138 dB SPL with the preattenuation switch engaged). A second switch activates a 200 Hz low cut to compensate for the proximity effect when the KMR 81 i is use at short distances.

      APPLICATIONS

      The KMR 81 i is primarily designed for film and broadcast applications. It is an excellent microphone for movie dialogue both in the studio and on location. The KMR 81 i is very lightweight and has a balanced center of gravity, making it a pleasure to use, even after several hours. Due to its low power consumption and its low sensitivity to wind and handling noise, the KMR 81 i is excellently suited for on-location work. Thanks to its natural sound and excellent off-axis behavior, the KMR 81 i can also be used as a problem solver in critical recording situations, e.g. to pick up a soloist in front of an orchestra.

      • -High directivity with 90° recording angle
      • -Excellent rejection of unwanted sound
      • -Natural sound without off-axis coloration
      • -Low cut and pad switches
      • -Lightweight (145 g)
      • -Low power consumption
      Acoustical operating principle Pressure gradient interference transducer
      Directional Pattern Supercardioid/lobe
      Frequency Range 20 Hz ... 20 kHz
      Sensitivity at 1 kHz into 1 kohm 18 mV/Pa ± 1 dB
      Rated Impedance 150 ohms
      Rated load impedance 1 kohms
      Equivalent noise level, CCIR¹⁾ 23 dB
      Equivalent noise level, A-weighted¹⁾ 12 dB-A
      Maximum SPL for THD 0.5%²⁾ 128 dB
      Maximum SPL for THD 0.5% with preattenuation²⁾ 138 dB
      Signal-to-noise ratio, CCIR (re. 94 dB SPL)¹⁾ 71 dB
      Signal-to-noise ratio, A-weighted (re. 94 dB SPL)¹⁾ 82 dB
      Maximum output voltage 1.3 dBu
      Supply voltage (P48, IEC 61938) 48 V ± 4 V
      Current consumption (P48, IEC 61938) 0.8 mA
      Matching connector XLR 3 F
      Weight 145 g
      Diameter 21 mm
      Length 213 mm
      Vekt 0.5 kg
      Produsent

      Neumann

    Handlekurv