| Components |
Thirty-two 50 mm (2 in) Full-Range Drivers |
|
Frequency Range (-10 dB) |
80 Hz – 20 kHz |
|
Frequency Response (±3 dB) |
130 Hz – 18 kHz (narrow coverage, music mode setting) |
|
Coverage - Vertical |
Narrow Mode:
15° (500 Hz – 16 kHz, +15°/-2° [< ,60° down to 220 Hz, < ,90° down to 140 Hz])
Broad Mode:
30° (400 Hz – 12 kHz, +15°/-8°, [< ,60° down to 220 Hz, < , 90° down to 140 Hz])
Asymmetrical Progressive-Gradient Mode:
(Top speaker module set at “Narrow” and bottom speaker module at “Broad”, for “J-type” coverage, sending higher sound levels toward the far area of the listening space): 22.°(+7° from aiming axis up , -15° from aiming axis down, 300 Hz – 12 kHz, +15°/-8°, [< ,60° down to 220 Hz, < ,90° down to 140 Hz]) |
|
Coverage - Horizontal |
150° (ave, 1 kHz – 4 kHz, ±20°) |
|
Sensitivity - Narrow |
(speech mode): 95 dB (2 kHz – 5 kHz)
(music mode): 92 dB (150 Hz – 18 kHz) |
|
Sensitivity - Broad |
(speech mode): 93 dB (2 kHz – 5 kHz)
(music mode): 90 dB (150 Hz– 18 kHz) |
|
Sensitivity - Asymmetrical Progressive-Gradient Mode
(on-axis) |
(speech mode): 94 dB (2 kHz – 5 kHz)
(music mode): 91 dB (150 Hz – 18 kHz) |
|
Nominal Impedance (direct) |
8? per half (top and bottom) for 4 ohms total (in thru mode).
Min-Z for system = 2.9?. |
|
Hookup |
Ensure identical polarity of hookup – for proper functioning, the two loudspeaker modules (top and bottom) must be hooked up in same polarity. Parallel hookup at the two sets of back panel input terminals is recommended. |
|
Power Capacity (thru setting) |
650W (2600W peak), 2 hrs
400W (1600W peak) 100 hrs |
|
Max SPL - Narrow |
(speech mode): 123 dB cont ave (129 dB peak)
(music mode): 120 dB cont ave (126 dB peak) |
|
Max SPL - Broad |
(speech mode): 121 dB cont ave (127 dB peak)
(music mode): 118 dB cont ave (124 dB peak) |
|
Max SPL - Asymmetrical Progressive-Gradient Mode
(on-axis) |
(speech mode): 122 dB cont ave (128 dB peak)
(music mode): 119 dB cont ave (125 dB peak) |
|
70V/100V Transformer Type |
Set individually per speaker module (top and bottom): 120W, 60W, 30W (15W at 70V only), and direct 8?, via switch. Total (with top & , bottom set to same): 240W, 120W, 60W (30W at 70V only) and direct 4?. Max. insertion loss less than 1 dB at any tap. |
|
Enclosure |
Fiberglass reinforced ABS cabinet, painted aluminum grille |
|
Connectors |
Two (one for top half and one for bottom half), screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), or bare wire (up to 12 AWC/2.5 mm2) |
|
Outdoor Capability |
IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant. |
|
Colors |
Black or White (-WH) |
|
Configuration |
Two pieces (top and bottom half), each 100 cm tall, connected together via Coupler Plate. Top/bottom orientation of each piece must be observed. |
|
Insert Points |
28 M6 insert points on back panel (36 total with 8 center points being utilized by the Coupler Plate). |
|
Mounting |
Included swivel (pan) / tilt wall bracket (must be mounted to threaded points on Coupler Plate) provides continuously variable ±80° left-right swivel aiming (at up to ±5° up/down tilt), continuously adjustable ±10° up/down tilt, as well as 5° fixed increment tilt angles to ±10°. Twenty-eight available threaded mounting points (M6 diameter x M1 thread pitch x 17 mm deep) located on back panel. Threaded mounting points can be utilized for suspension. Compatible with OmniMount 30.0 brackets |
|
Dimensions (H x W x D) |
2000 x 98.5 x 153 mm (78.8 x 3.8 x 6.0 in) |
|
Net Weight |
14.6 kg (33 lb) |
|
Included Accessories |
Swivel (pan) / tilt wall bracket, Coupler plate |
|
Optional Accessories |
MTC-PC2 terminal panel cover
MTC-CBT-FM1 flush-mount low-profile wall-mount bracket (2 pieces required)
MTC-CBT-SMB1 stand-mount bracket for use with 35 mm speaker stands (heavy duty stand required) |
