Yamaha XMV8280D

kr 43 814,- (ink. mva)

Bestillingsvare

Legg til ønskelisteFjern fra ønskeliste
Legg til ønskeliste

FRAKTPRISER FRA 99,-

(Gjelder ikke varer over 35 kg)

Varenummer: XMV8280D Kategori:

Ikke på lager, kontakt oss for bestilling og leveringstid.

      SPECS:

      XMV4280, XMV4140, XMV4280-D, XMV4140-D

       

      Model XMV4280 XMV4140 XMV4280-D XMV4140-D
      Output Power 1kHz, THD+N = 1% (20 ms Burst) 4Ω 280W x 4 140W x 4 280W x 4 140W x 4
      8Ω 280W x 4 140W x 4 280W x 4 140W x 4
      4Ω/ Double Power Mode 560W x 2 280W x 2 560W x 2 280W x 2
      8Ω/ Double Power Mode 560W x 2 280W x 2 560W x 2 280W x 2
      High impedance 100V line 250W x 4 / 40 Ω 125W x 4 / 80 Ω 250W x 4 / 40 Ω 125W x 4 / 80 Ω
      70V line 250W x 4 / 20 Ω 125W x 4 / 40 Ω 250W x 4 / 20 Ω 125W x 4 / 40 Ω
      Voltage Gain RL=8Ω 31.7dB 28.7dB 31.7dB 28.7dB
      RL=8Ω / Double Power Mode 34.7dB 31.7dB 34.7dB 31.7dB
      100V 38.2dB 38.2dB 38.2dB 38.2dB
      70V 35.2dB 35.2dB 35.2dB 35.2dB
      Input Sensitivity RL=8Ω +4dBu
      S/N Ratio A-weighted ≥ 100dB
      Power Consumption 1/8 power (4 Ω pink noise) 250W 150W 250W 150W
      Idle (4 Ω) 37W 37W 37W 37W
      Standby 18.5W 18.5W 18.5W 18.5W
      THD+N 1kHz, half power ≤ 0.2%
      Frequency Response RL=8Ω, 100V/70V, Po=1W, 20Hz – 20kHz 0dB, ±1.0dB
      Crosstalk 1kHz, half power, 8 Ω, Att. max, input 150 Ω shunt ≤ -60dB
      Maximum Input Level +24dBu
      Input Impedance 20kΩ (balanced), 10k Ω (unbalanced)
      Connectors Analog Input Euroblock x 2 (6P, balanced)
      Digital Input / Output RJ45 x 2 (YDIF IN / OUT) RJ45 x 2 (Dante PRIMARY / SECONDARY)
      Speaker Output Barrier strip x 4 pairs
      Network RJ45 x 1 Shared with Dante ports
      Remote, Fault Output Euroblock (3P) x 1
      AC IN AC Inlet x 1
      Protection circuit Load Protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
      Amplifier Protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), 
      Low load impedance: Output mute (Restored automatically)
      Power Supply Protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , 
      Integrated power: Gain reduction (Restored automatically)
      Cooling Fan 3-Speed fan x 2, front-to-back airflow
      Power Requirements 100V, 120V, 230V-240V; 50Hz/60Hz
      Dimensions W 480mm (18.9″)
      H 88mm (3.5″)
      D 422mm (16.6″)
      Weight 8.1kg (17.9lbs)

       

      XMV8280, XMV8140, XMV8280-D, XMV8140-D

       

      Model XMV8280 XMV8140 XMV8280-D XMV8140-D
      Output Power 1kHz, THD+N = 1% (20 ms Burst) 4Ω 280W x 8 140W x 8 280W x 8 140W x 8
      8Ω 280W x 8 140W x 8 280W x 8 140W x 8
      4Ω/ Double Power Mode 560W x 4 280W x 4 560W x 4 280W x 4
      8Ω/ Double Power Mode 560W x 4 280W x 4 560W x 4 280W x 4
      High impedance 100V line 250W x 8 / 40 Ω 125W x 8 / 80 Ω 250W x 8 / 40 Ω 125W x 8 / 80 Ω
      70V line 250W x 8 / 20 Ω 125W x 8 / 40 Ω 250W x 8 / 20 Ω 125W x 8 / 40 Ω
      Voltage Gain RL=8Ω 31.7dB 28.7dB 31.7dB 28.7dB
      RL=8Ω / Double Power Mode 34.7dB 31.7dB 34.7dB 31.7dB
      100V 38.2dB 38.2dB 38.2dB 38.2dB
      70V 35.2dB 35.2dB 35.2dB 35.2dB
      Input Sensitivity RL=8Ω +4dBu
      S/N Ratio A-weighted ≥ 100dB
      Power Consumption 1/8 power (4 Ω pink noise) 450W 250W 450W 250W
      Idle (4 Ω) 73W 73W 73W 73W
      Standby 23W 23W 23W 23W
      THD+N 1kHz, half power ≤ 0.2%
      Frequency Response RL=8Ω, 100V/70V, Po=1W, 20Hz – 20kHz 0dB, ±1.0dB
      Crosstalk 1kHz, half power, 8 Ω, Att. max, input 150 Ω shunt ≤ -60dB
      Maximum Input Level +24dBu
      Input Impedance 20kΩ (balanced), 10k Ω (unbalanced)
      Connectors Analog Input Euroblock x 2 (6P, balanced)
      Digital Input / Output RJ45 x 2 (YDIF IN / OUT) RJ45 x 2 (Dante PRIMARY / SECONDARY)
      Speaker Output Barrier strip x 8 pairs
      Network RJ45 x 1 Shared with Dante ports
      Remote, Fault Output Euroblock (3P) x 1
      AC IN AC Inlet x 1
      Protection circuit Load Protection POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
      Amplifier Protection Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), 
      Low load impedance: Output mute (Restored automatically)
      Power Supply Protection Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , 
      Integrated power: Gain reduction (Restored automatically)
      Cooling Fan 3-Speed fan x 2, front-to-back airflow
      Power Requirements 100V, 120V, 230V-240V; 50Hz/60Hz
      Dimensions W 480mm (18.9″)
      H 88mm (3.5″)
      D 422mm (16.6″)
      Weight 10.1kg (22.3lbs)

      Vekt 5 kg
      Produsent

      Yamaha Pro

      Omtaler

      Det er ingen omtaler ennå.

    Relaterte produkter

    Handlekurv